SMART Board Board 800ix2 Configuration And User's Manual page 79

A P P E N D I X C
Adjusting projector settings
Setting Use
Projector Functions menu
Auto Signal Enables or disables signal
Detect searching of input connectors.
Lamp Reminder Turns the lamp replacement
reminder on or off.
Lamp Mode Adjusts lamp brightness to
Standard or Economy.
Auto Power Off Sets the length of the auto
(minutes) power-off countdown timer
between 1 and 240 minutes.
Zoom Adjusts the zoom to the center
of the image in or out from 0 to
30.
Projector ID Displays the projector's unique
ID number (from 0 to 99) within
your organization's network.
Aspect Ratio Adjusts the image output to
Fill Screen, Match Input or
16:9.
69 smarttech.com/kb/170453
Notes
The default is off.
Select On to have the projector continuously
switch inputs until it finds an active video
source.
Select Off to maintain signal detection in one
input.
This reminder appears 100 hours before the
recommended lamp replacement.
Standard displays a high-quality, bright
image.
Economy increases the lamp life by
decreasing the brightness of the image.
The default is 120 minutes.
The timer begins to count down when the
projector no longer receives a video signal.
The timer finishes when the projector enters
Standby mode.
Select 0 to turn off the timer.
The default is 0.
Zooming in cuts off the outer edges of the
source video.
You can refer to or change this number when
using the network remote management feature
(see Remotely managing your system through
a network interface on page 41).
The default is Fill Screen.
Fill Screen produces an image that fills the
entire screen by stretching and scaling the
source video to match the projector's native
resolution and aspect ratio.
Match Input displays the source video in its
native aspect ratio. As a result, unused space
could appear along the top and bottom edges
of the screen (letterbox format) or along the left
and right edges of the screen (pillarbox
format).
See Video format compatibility on page 75 for
descriptions of each mode.