Before You Start; Locating Status Lights - SMART Board Board 800ix2 Configuration And User's Manual

C H A P T E R 5
Troubleshooting your interactive whiteboard system
This chapter provides basic troubleshooting information for your interactive whiteboard system.
For issues not covered in this chapter, consult the SMART Support website (smarttech.com/support)
or contact your authorized SMART reseller (smarttech.com/where).

Before you start

Before you troubleshoot your interactive whiteboard system or contact SMART Support or your
authorized SMART reseller for assistance, you need to do the following:
Locate your interactive whiteboard system's status lights
l
Locate your interactive whiteboard system's serial numbers
l

Locating status lights

You interactive whiteboard system consists of several components, which have their own status
lights:
Your interactive whiteboard's Ready light is located on the pen tray.
l
Your projector's Power
l
The ECP's Power
l
functions as a status light.
26 smarttech.com/kb/170453
and Service lights are located on the bottom of the projector.
button (see Using the Extended Control Panel (ECP) on page 15) also