Display Controls - SMART Board Board 800ix2 Configuration And User's Manual

A P P E N D I X B
Remotely managing your system through an RS-232 serial interface

Display controls

These commands control the video display of the projector.
Usable command Property
by power state
Standby On
/ idle
get get videoinputs
get set or get input
set or get autosignal
set or get signaldetected
set or get displayhide
set or get videomute
set or get videofreeze
set or get autopoweroff
56 smarttech.com/kb/170453
Valid values
Returns a text list of
available video source
inputs, such as VGA#,
HDMI#, Composite.
• VGA# [# range of 1~5]
• HDMI# [# range of 1~5]
• Composite
• None
• Next (settable only, not
gettable)
• on
• off (default)
• true
• false
• normal (default)
• frozen
• muted
• on
• off (default)
• on
• off (default)
• on
• off (default)
Notes
The default SMART UX80
projector with no accessories
will return a list of VGA1,
HDMI1, HDMI2.
A default SMART UX80
projector with no additional
accessories has VGA1,
HDMI1 and HDMI2 only.
Causes the projector to
automatically rotate through
all available video inputs
until a valid video source
signal is found.
Indicates if an active source
video signal is detected by
the projector.