SMART Board Board 800ix2 Configuration And User's Manual page 7

I M P O R T A N T I N F O R M A T I O N
Environmental
requirement
Water and fluid
resistance
Dust
Electrostatic discharge
(ESD)
Cables
Conducted and radiated
emissions
v smarttech.com/kb/170453
Parameter
Intended for indoor use only. Doesn't meet any salt-spray or water
l
ingress requirements.
Don't pour or spray liquids directly onto your interactive whiteboard,
l
the projector or any of its sub-components.
Intended for use in office and classroom environments. Not for
l
industrial use where heavy dust and pollutants can cause
malfunctions or impaired operation. Periodic cleaning is required in
areas with heavier dust. See Cleaning the projector on page 21 for
information on cleaning the SMART UX80 projector.
EN61000-4-2 severity level 4 for direct and indirect ESD
l
No malfunction or damage up to 8kV (both polarities) with a 330 ohm,
l
150 pF probe (air discharge)
Unmated connectors meet no malfunction or damage up to 4kV (both
l
polarities) for direct (contact) discharge
All SMART Board 800ix2 interactive whiteboard system cables
l
should be shielded to prevent potential accidents and degraded video
and audio quality.
EN55022/CISPR 22, Class A
l