Using The Smart Gowire Cable - SMART Board Board 800ix2 Configuration And User's Manual

C H A P T E R 3
Using your interactive whiteboard system
N O T E
Use an 800 series control cable (Part No. SBX8-CTRL) to convert the 4-pin connector to a DB9F
RS-232 connector for use with a third-party room control system. An 800 series control cable is
included with SMART Board 800ix2-SMP interactive whiteboard systems. Alternatively, you can
purchase an SBX8 series control cable from your local SMART reseller.
Using the SMART GoWire cable
The SMART GoWire cable is a USB to USB connection that enables you to use SMART Meeting Pro
PE software on computers that don't have the software installed.
N O T E S
A SMART GoWire cable is included with SMART Board 800ix2-SMP interactive whiteboard
systems.
If you're using a computer that doesn't have the software installed, you can connect the computer to
the interactive whiteboard system using the SMART GoWire cable.
The SMART Board icon
access additional tools and to configure your hardware and software settings.
I M P O R T A N T
Ensure that Autoplay is enabled on your computer before you connect the auto-launch cable. Go to
smarttech.com/support
For more information on SMART Meeting Pro software, search for the SMART Meeting Pro PE
software release notes in smarttech.com/support.
17 smarttech.com/kb/170453
appears in the notification area on your computer. Click the icon to
for more information.