Appendix C: Adjusting Projector Settings - SMART Board Board 800ix2 Configuration And User's Manual

Appendix C
Adjusting projector settings
The remote control's Menu button enables you to access the on-screen display to adjust the projector
settings.
I M P O R T A N T
Keep your remote control in a safe place because there is no other way to access menu options.
Setting Use
Image Adjustment menu
Display Mode Indicates the projector's display
output (SMART Presentation,
Bright Room, Dark Room,
sRGB and User).
Brightness Adjusts projector brightness
from 0 to 100.
Contrast Adjusts the difference between
the lightest and darkest parts
of the image from 0 to 100.
Frequency Adjusts the display data
frequency of the projected
image from -5 to 5 to match the
frequency of your computer's
graphics card.
Tracking Synchronizes your projector's
display timing with your
computer's graphics card from 0
to 63.
67 smarttech.com/kb/170453
Notes
The default is SMART Presentation.
The default is 50.
The default is 50.
The default is 0.
This setting applies to VGA inputs only.
This setting applies to VGA inputs only.