SMART Board Board 800ix2 Configuration And User's Manual page 55

A P P E N D I X A
Remotely managing your system through a network interface
Submenu setting
Aspect Ratio
Startup Screen
High Speed Fan
Projector Mode
Source
SMART Fixed Install (FI) /
SMART Desktop mode (DT)
HDMI1
HDMI2
VGA1
45 smarttech.com/kb/170453
Description
Adjusts the image output to Fill Screen, Match Input or 16:9.
Fill Screen produces an image that fills the entire screen by
l
stretching and scaling.
Match Input matches the projector's aspect ratio to the input's
l
aspect ratio. As a result, black bands might appear along the top
and bottom edges of the screen horizontally (letterbox format) or
along the left and right edges of the screen vertically (pillarbox
format).
16:9 changes the output to 16:9 by letterboxing the image, which
l
is recommended for use with HDTV and DVDs enhanced for
wide-screen television.
N O T E
See Video format compatibility on page 75 for appearance
descriptions in each mode.
Sets the type of startup screen to SMART or User. The SMART
screen is the default SMART logo on a blue background. The User
screen uses the saved picture from the Capture User Startup Screen
function.
Adjusts the speed of the projector's fan. Select High or Normal.
N O T E
Use the High setting when the projector's temperature is high or the
altitude is above 6000' (1800 m).
Adjusts the projection mode to Front, Ceiling, Rear or Rear
Ceiling.
I M P O R T A N T
SMART recommends that you never change this setting from the
Ceiling projection mode.
Adjusts the input source to VGA, HDMI1 or HDMI2.
User-defined tag not currently used. Reserved for future application.
Assigns an alternative name to your HDMI1 input, which appears
when you select the HDMI1 input.
Assigns an alternative name to your HDMI2 input, which appears
when you select the HDMI2 input.
Assigns an alternative name to your VGA 1 input, which appears
when you select the VGA 1 input.