Password Settings - SMART Board Board 800ix2 Configuration And User's Manual

A P P E N D I X A
Remotely managing your system through a network interface
Submenu setting
Alert Condition

Password settings

This menu provides a security function that allows an administrator to manage projector use and
enable the Administrator Password function.
Submenu setting
Password
N O T E S
The first time you enable the password settings, the default password value is four numbers,
l
for example, 1234.
If you forget the projector password, refer to Accessing the service menu on page 39 to set the
l
projector setting to factory defaults.
49 smarttech.com/kb/170453
Description
Sends e-mail alerts whenever the following conditions occur. Select
the settings you want, and then click Submit.
Over Temperature
l
Fan Failure: DMD
l
Fan Failure: System
l
Fan Failure: Blower
l
Lamp Error
l
Color Wheel Break
l
Lamp Ignite Error
l
Lamp Driver Failure
l
Lamp Over Hours
l
N O T E
The projector sends an alert e-mail (SMART Alert) to your e-mail
address. Click E-mail Alert Test to confirm that your e-mail
address and SMTP server settings are correct by sending a test
e-mail (SMART Alert-Test Mail).
If the settings aren't correct, the e-mail alert messages aren't sent
or received successfully and warnings and notification messages
aren't available to advise of this state.
Description
When the password function is enabled, the administrator password
is required to access Web Management. Select Disable to allow
remote web management of the projector without requiring a
password.