Environmental Requirements - SMART Board Board 800ix2 Configuration And User's Manual

I M P O R T A N T I N F O R M A T I O N
C A U T I O N
Do not block the projector's ventilation slots and openings.
l
If dust or small items prevent pen tray buttons from being pressed or cause constant button
l
contact, remove the obstructions carefully.
I M P O R T A N T
If you have peripheral devices that do not use a 3.5 mm phone jack audio in/out, a DB15 VGA
l
video input connector or an HDMI™ video connector, you may need to purchase third-party
adapters.
Keep your remote control in a safe place because there is no other way to access menu
l
options.
Do not disconnect cables from the ECP to connect peripheral devices because you could
l
disconnect controls for your interactive whiteboard.
Disconnect the product from its power source when it is not used for a long period.
l
Other precautions
If you own a SMART product other than a SMART Board 800ix2 series interactive whiteboard
system, refer to the warnings document that shipped with your product for relevant warnings and
maintenance instructions.

Environmental requirements

Before you install your interactive whiteboard system, review the following environmental
requirements.
Environmental
requirement
Operating temperature
Storage temperature
Humidity
iv smarttech.com/kb/170453
Parameter
41°F to 95°F (5°C to 35°C) from 0' to 6000' (0 m to 1800 m)
l
41°F to 86°F (5°C to 30°C) from 6000' to 9800' (1800 m to 3000 m)
l
-4°F to 122°F (-20°C to 50°C)
l
5% to 95% storage relative humidity, non-condensing
l
5% to 85% operating relative humidity, non-condensing