Appendix A: Using The On-Screen Display Menu - SMART Board 8070i-G4-SMP Setup And Maintenance Manual

Appendix A
Using the on-screen display
menu
Changing settings in the on-screen display menu
SMART Board 8070i-G4-SMP interactive flat panel on-screen display menu
SMART Board 8084i-G4-SMP interactive flat panel on-screen display menu
You can access the on-screen display menu using either the remote control (see Remote control
buttons on page 37) or the menu control panel (see Menu control panel on page 41).
Changing settings in the on-screen display menu
To change settings in the on-screen display menu
1. Press the MENU button on the remote control or the menu control panel.
The on-screen display menu appears.
2. Press the up and down arrows to select a menu, and then press SET or OK.
3. Press the up and down arrows to select a menu option.
4. Press the left and right arrows to change the menu option's setting.
OR
Press the right arrow to open the menu option's submenu. (Repeat steps 3 and 4 to change
settings in the submenu.)
5. Press MENU until the on-screen menu closes.
65 smarttech.com/kb/170446
65
66
72