Display Controls - SMART Board M685ix2 Configuration And User's Manual

A P P E N D I X B
Remotely managing your system through an RS-232 serial interface

Display controls

These commands control the video display of the projector.
Usable Property
command by
power state
Standby On
/ idle
get get videoinputs
get set or input
get
set or autosignal
get
set or signaldetected
get
set or displayhide
get
set or videomute
get
set or videofreeze
get
set or autopoweroff
get
58
Valid values
Returns a text list of
available video source
inputs, such as VGA#,
HDMI#, Composite.
• VGA# [# range of 1~5]
• HDMI# [# range of 1~5]
• Composite
• None
• Next (settable only, not
gettable)
• on
• off (default)
• true
• false
• normal (default)
• frozen
• muted
• on
• off (default)
• on
• off (default)
• on
• off (default)
Notes
The default SMART UX80
projector with no
accessories will return a list
of VGA1, HDMI1, HDMI2.
A default SMART UX80
projector with no additional
accessories has VGA1,
HDMI1 and HDMI2 only.
Causes the projector to
automatically rotate through
all available video inputs
until a valid video source
signal is found.
Indicates if an active source
video signal is detected by
the projector.