I M P O R T A N T I N F O R M A T I O N
I M P O R T A N T
If you have peripheral devices that do not use a 3.5 mm phone jack audio in/out, a DB15 VGA
l
video input connector or an HDMI™ video connector, you may need to purchase third-party
adapters.
Keep your remote control in a safe place because there is no other way to access menu
l
options.
Do not disconnect cables from the ECP to connect peripheral devices because you could
l
disconnect controls for your interactive whiteboard.
Disconnect the product from its power source when it is not used for a long period.
l
Other precautions
If you own a SMART product other than a SMART Board 685ix2 series interactive whiteboard
system, refer to the warnings document that shipped with your product for relevant warnings and
maintenance instructions.
Environmental requirements
Before you install your interactive whiteboard system, review the following environmental
requirements.
Environmental
requirement
Operating temperature
Storage temperature
Humidity
Water and fluid
resistance
iv
smarttech.com/kb/170510
Parameter
41°F to 95°F (5°C to 35°C) from 0' to 6000' (0 m to 1800 m)
l
41°F to 86°F (5°C to 30°C) from 6000' to 9800' (1800 m to 3000 m)
l
-4°F to 122°F (-20°C to 50°C)
l
5% to 95% storage relative humidity, non-condensing
l
5% to 85% operating relative humidity, non-condensing
Humidity above 80% could cause slight wrinkling in the screen
l
surface sheet. The wrinkles disappear when the humidity lowers.
Intended for indoor use only. Doesn't meet any salt-spray or water
l
ingress requirements.
Don't pour or spray liquids directly onto your interactive whiteboard,
l
the projector or any of its sub-components.