Chrysler Conquest 1988 Service Manual page 39

WIRING HARNESS
- How To Read Wiring Diagrams
8-25
HOW TO READ CIRCUIT DIAGRAMS
The circuit diagrams are functionally separated.
(1) Indication of circuit connected to another circuit.
When the circuit in a circuit diagram is connected to another circuit in a different diagram, the page
number of that different diagram is indicated so that it can be referred to.
(2)
Indication of device connections
The circuit diagram shows whether a device harness connection is one with an attached cable or is a
direct connection type.
(3) Indication of connectors in circuit diagrams
A connector in a circuit diagram is shown in a frame and is assigned a connector symbol. This symbol
corresponds to the symbol in a wiring harness configuration diagram so that the connector location can be
known easily. An intermediate connector has its female side only shown as a rule. However, both of the
male and female sides are shown when they differ in wiring color.
If a frame showing a
connector touches the
symbol of a device, it
indicates that the device
I I
Refer to Items (2) and (3).
The frame shows the connec-
tor is not touching the symbol
of a device, and indicates that
thE device harness connec-
tion is one with an attached
cable.
Fusible link
Battery -~
(RG) - (RB)
RB _ (RB) 1 1 (GR)
U
-25-B 5-w
I I I I I II I
B-35
P
To cargo room light
(Refer to P.4-5.)
to another circuit or, the
names of devices to
Indicates that this connector
is a B-39 connector.
which the circuit is con-
netted, and pages on
which diaarams of such
another circuit appear
are indicated.