Chrysler Conquest 1988 Service Manual page 227

WIPER AND WASHER SYSTEM - Windshield Wipers
8-215
Battery
16Y2954
Battery
16Y2951
To wiper
motor bracket
16Y295:
HIGH SPEED OPERATION CHECK
Connect battery (-I-) to terminal 4 and battery (-) to terminal 2
and check that the motor runs at high speed.
AUTOMATIC STOP OPERATION CHECK
(1) Connect battery (+) to terminal 4 and battery (-) to terminal
1 to run the motor at low speed.
(2) Disconnect terminal 4 during operation to stop the motor.
(3) Connect terminal 1 to terminal 3 and connect battery (+) to
terminal 4 and battery (-) to the wiper motor bracket to
check that the motor starts to run at low speed and then
stops.
WIPER RELAY
(1) Remove the wiper relay.