Chrysler Conquest 1988 Service Manual page 279

ETACS
- ETACS Computer Input/Output Signals
8-267
(5) Door unlock relay drive (terminal No.19)
Condition at input side
Door switch at Door lock
ON and key- actuator switch
reminder switch (left and right)
at OFF
._
ON (unlock) H
OFF (lock) L
Output signal waveform and its operation
Output signal
Door unlock relay
16R0022
(6) Defogger relay and defogger indicator light drive (terminal No.28)
*I/L: Indicator light
Condition at input side
Output signal waveform and its operation
Output signal
Defogger and *I/L
Ignition key
atON Defogger switch
Ei : ~()(),,/-%+
NOTE
Defogger switch will be switched OFF after left ON for 20 minutes.
(7) Power window relay (terminal No.25)
Condition at input side
Output signal waveform and its operation
I
30-second period
after ignition key
I-----
turned to ON or OFF
Ignition switch
OFF
ON -+ OFF H
ON L
Output signal
Ignition
Ignition
Power window relay
OFF
ON (30-sec.)
NOTE
When a door is opened during timer (30-second) operation, timer operation will stop and power windows
can't be
operated.
(8) Security light control (terminal No.32)
Condition at input side
Output signal waveform and its operation
Output signal Security light
Ignition key removed;
all doors keyless-locked