Chrysler Conquest 1988 Service Manual page 166

8-154
_ _ _ - _ -
_ _ _ - -
IGNITION SYSTEM
- Distributor
SERVICE POINTS OF DISASSEMBLY
Before servicing be sure to lightly clamp distributor In a vjce 7
a='
equipped wrth soft jaws.
=y ~,
Making mating marks
7. REMOVAL OF GOVERNOR SPRING
6ELl r
GEL105
Make marks on either pair of governor pin and spring for ~1
reference at reassembly.
IO. REMOVAL OF RETAINING BOLT
Be very careful when loosenrng the retaining bolt, because -2
It
IS
coated vvlth screw-lock cement.
19.
REMOVAL OF
STAJOR
Do not place the removed stator in an area where it might 11
attract iron filings or pieces.
--;
- _
22: REMOVAL OF SPRING PIN
(1) Mark location of driven gear on distributor shaft.
(2) Place driven gear onsoft vise (wood blockj so that "l
spring pin can be removed.
~-
(3) Using a pin punch, remove spring pin.