Table of Contents

Advertisement

Quick Links

2022 Grand Caravan
O W N E R ' S M A N U A L

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Grand Caravan 2022 and is the answer not in the manual?

Questions and answers

Summary of Contents for Chrysler Grand Caravan 2022

  • Page 1 2022 Grand Caravan O W N E R ’ S M A N U A L...
  • Page 2 This Owner’s Manual illustrates and describes the operation of features and equipment that are either standard or optional on this vehicle. This manual may also include a description of features and equipment that are no longer available or were not ordered on this vehicle. Please disregard any features and equipment described in this manual that are not on this vehicle.
  • Page 3: Table Of Contents

    TABLE OF CONTENTS INTRODUCTION ..........................7 GETTING TO KNOW YOUR VEHICLE ..................12 GETTING TO KNOW YOUR INSTRUMENT PANEL ............82 STARTING AND OPERATING ....................104 MULTIMEDIA ..........................140 SAFETY ............................158 IN CASE OF EMERGENCY ..................... 217 SERVICING AND MAINTENANCE ..................243 TECHNICAL SPECIFICATIONS ....................
  • Page 4 INTRODUCTION MIRRORS..............48 DOORS..............20 Manual Door Locks — If Equipped ....20 Inside Rearview Mirror........48 SYMBOLS KEY............8 Power Door Locks — If Equipped.....21 Illuminated Vanity Mirrors — VEHICLE MODIFICATIONS/ALTERATIONS.....8 Keyless Enter ‘n Go™ — Passive Entry....21 If Equipped ............48 SYMBOL GLOSSARY..........8 Automatic Unlock Doors On Exit —...
  • Page 5 EXTERIOR LIGHTS ..........54 WINDOWS ...............72 INSTRUMENT CLUSTER DISPLAY ......85 Multifunction Lever ..........54 Power Windows ..........72 Instrument Cluster Display Location And Headlight Switch..........54 Automatic Window Features ......73 Controls.............86 Daytime Running Lights (DRLs) — Reset Auto Up...........74 Oil Life Reset ............87 If Equipped............55 Wind Buffeting..........74 KeySense Cluster Messages —...
  • Page 6 STARTING AND OPERATING TRAILER TOWING ..........129 STOP/START SYSTEM — IF EQUIPPED..... 117 Autostop Mode ..........117 Common Towing Definitions......130 STARTING THE ENGINE........104 Possible Reasons The Engine Does Not Trailer Hitch Classification......131 Normal Starting ..........104 Autostop............117 Trailer Towing Weights AutoPark ............
  • Page 7 SAFETY IN CASE OF EMERGENCY SERVICING AND MAINTENANCE SAFETY FEATURES ..........158 HAZARD WARNING FLASHERS......217 SCHEDULED SERVICING ........243 Anti-Lock Brake System (ABS) ..... 158 ASSIST AND SOS MIRROR — IF EQUIPPED ..217 Maintenance Plan......... 244 Rear Seat Reminder Alert (RSRA) ....159 ENGINE COMPARTMENT ........247 JACKING AND TIRE CHANGING —...
  • Page 8 TECHNICAL SPECIFICATIONS CUSTOMER ASSISTANCE TIRES ..............275 Tire Safety Information ......... 275 VEHICLE IDENTIFICATION NUMBER (VIN) ..295 SUGGESTIONS FOR OBTAINING SERVICE Tires — General Information ......282 BRAKE SYSTEM........... 295 FOR YOUR VEHICLE..........301 Tire Types............286 WHEEL AND TIRE TORQUE Prepare For The Appointment ......
  • Page 9: Introduction

    For further information, contact an authorized dealer. When it comes to service, remember that authorized dealers know your Chrysler vehicle best, have factory-trained technicians and genuine Mopar® parts, and care about your satisfaction.
  • Page 10: Symbols Key

    SYMBOLS KEY VEHICLE MODIFICATIONS/ALTERATIONS These statements are against operating WARNING! WARNING! procedures that could result in a collision, bodily Any modifications or alterations to this vehicle could seriously affect its injury and/or death. roadworthiness and safety and may lead to a collision resulting in serious These statements are against procedures that injury or death.
  • Page 11 Red Warning Lights Red Warning Lights Door Open Warning Light Seat Belt Reminder Warning Light page 96 page 97 Ú Ú Electric Power Steering (EPS) Fault Warning Light Transmission Temperature Warning Light page 96 page 97 Ú Ú Electronic Throttle Control (ETC) Warning Light Vehicle Security Warning Light page 96 page 98...
  • Page 12 Yellow Warning Lights Yellow Indicator Lights Engine Check/Malfunction Indicator Warning Light (MIL) Automatic Emergency Braking (AEB) OFF Indicator Light page 99 page 101 Ú Ú Low Fuel Warning Light Green Indicator Lights page 99 Ú Cruise Control Set Indicator Light Low Washer Fluid Warning Light page 101 Ú...
  • Page 13 Green Indicator Lights White Indicator Lights Parking/Headlights On Indicator Light Cruise Control Ready Indicator Light page 101 page 101 Ú Ú Stop/Start Active Indicator Light Set Speed Display page 101 page 101 Ú Ú Turn Signal Indicator Lights Blue Indicator Lights page 101 Ú...
  • Page 14: Getting To Know Your Vehicle

    GETTING TO KNOW YOUR VEHICLE KEYS NOTE: The key fob’s wireless signal may be blocked if  the key fob is located next to a mobile phone, laptop, or other electronic device. This may Your vehicle is equipped with a key fob which result in poor performance.
  • Page 15 GETTING TO KNOW YOUR VEHICLE To Lock/Unlock The Doors And Liftgate NOTE: Customers are recommended to use a battery Push and release the unlock button on the key fob  obtained from Mopar®. Aftermarket coin once to unlock the driver’s front door and sliding battery dimensions may not meet the original door or twice within five seconds to unlock all OEM coin battery dimensions.
  • Page 16 GETTING TO KNOW YOUR VEHICLE KeySense also has additional features that are WARNING! WARNING! always enabled when the specific key is in use that cannot be set by the vehicle owner. While this The integrated key fob contains a coin cell Always remove the key fobs from the vehicle ...
  • Page 17: Sentry Key

    GETTING TO KNOW YOUR VEHICLE IGNITION SWITCH Start Up Display Features After placing the ignition in the ON/RUN position, the Vehicle Security Light will turn on for three Unique splash screen graphic  seconds for a bulb check. If the light remains on ‘...
  • Page 18 GETTING TO KNOW YOUR VEHICLE The push button ignition can be placed in the WARNING! following modes: Do not leave the key fob in or near the vehicle,  or in a location accessible to children, and do The engine is stopped ...
  • Page 19: Remote Start - If Equipped

    GETTING TO KNOW YOUR VEHICLE REMOTE START — IF EQUIPPED All of the following conditions must be met before EMOTE TART the engine will Remote Start: Push and release the Remote Start button on the This system uses the key fob to start the Gear selector in PARK ...
  • Page 20: To Exit Remote Start Mode

    GETTING TO KNOW YOUR VEHICLE NOTE: page 141. In warm weather, the driver vented Ú WARNING! seat feature will automatically turn on when the For vehicles equipped with the Keyless Enter ‘n  Remote Start is activated, if programmed via the Do not start or run an engine in a closed ...
  • Page 21: Remote Start Windshield Wiper De-Icer Activation - If Equipped

    GETTING TO KNOW YOUR VEHICLE NOTE: Remote Start Cancelled — Time Expired 2. Perform one of the following methods to lock  These features will stay on through the duration the vehicle: Remote Start Disabled — Start Vehicle To Reset ...
  • Page 22: Rearming Of The System

    GETTING TO KNOW YOUR VEHICLE NOTE: EARMING YSTEM The driver's door key cylinder and the liftgate  If something triggers the alarm and no action is button on the key fob cannot arm or disarm the taken to disarm it, the Vehicle Security system will Vehicle Security system.
  • Page 23: Power Door Locks - If Equipped

    GETTING TO KNOW YOUR VEHICLE — I ‘ ™ — P OWER OCKS QUIPPED EYLESS NTER ASSIVE WARNING! NTRY A power door lock switch is on each front door trim For personal security and safety in the event  panel. Use this switch to lock or unlock the doors. of a collision, lock the vehicle doors before you The Passive Entry system is an enhancement to drive as well as when you park and leave the...
  • Page 24 GETTING TO KNOW YOUR VEHICLE NOTE: NOTE: If the vehicle is unlocked by Passive Entry and  no door is opened within 60 seconds, the The vehicle will only unlock the doors when a valid Either the driver door only or all doors will unlock ...
  • Page 25 GETTING TO KNOW YOUR VEHICLE NOTE: After pushing the door handle button, you must  wait two seconds before you can lock or unlock the doors, using either Passive Entry door handle. This is done to allow you to check if the vehicle is locked by pulling the door handle, without the vehicle unlocking.
  • Page 26: Automatic Unlock Doors On Exit - If Equipped

    GETTING TO KNOW YOUR VEHICLE — Always make sure that the sliding door is fully UTOMATIC NLOCK OORS latched anytime the vehicle is in motion. QUIPPED NOTE: The Unlock Doors Automatically On Exit feature The left side sliding door cannot be opened while unlocks all of the vehicle doors when any door is the fuel door is open.
  • Page 27: Child Protection Door Lock System - Rear Doors

    GETTING TO KNOW YOUR VEHICLE NOTE: WARNING! If anything obstructs the power sliding side door  Personal injury or cargo damage may occur if while it is closing or opening, the door will auto-  caught in the path of the sliding door. Make matically reverse to the closed or open position sure the door path is clear before closing the and an audible tone will sound, provided it...
  • Page 28: Steering Wheel

    GETTING TO KNOW YOUR VEHICLE To Engage The Child Protection Door Lock After disengaging the Child Protection Door To Disengage The Child Protection Door Lock  Lock, always test the inside door handle with the 1. Open the sliding side door. 1.
  • Page 29: Heated Steering Wheel I F Equipped

    GETTING TO KNOW YOUR VEHICLE — EATED TEERING HEEL WARNING! QUIPPED Persons who are unable to feel pain to the  The steering wheel contains a heating skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, element that helps warm your hands in alcohol use, exhaustion, or other physical cold weather.
  • Page 30: Manual Adjustment (Front Seats) - If Equipped

    GETTING TO KNOW YOUR VEHICLE Manual Front Adjuster WARNING! WARNING! Both front seats are adjustable forward or Adjusting a seat while driving may be Do not allow people to ride in any area of your   rearward. The manual seat adjustment handle is dangerous.
  • Page 31: Manual Adjustment (Rear Seats)

    GETTING TO KNOW YOUR VEHICLE Manual Forward/Rearward Adjustment — WARNING! WARNING! Quad Seats (If Equipped) Do not ride with the seatback reclined so that Adjusting a seat while driving may be  Both second row seats are adjustable forward or the shoulder belt is no longer resting against dangerous.
  • Page 32 GETTING TO KNOW YOUR VEHICLE To recline, lean forward slightly, lift the lever, and push back to the desired position and release the lever. Lean forward and lift the lever to return the seatback to its normal position. Using body pressure, lean forward and rearward on the seat to be sure the seatback has latched.
  • Page 33 GETTING TO KNOW YOUR VEHICLE 4. Once the latches are released, tilt the entire Reinstalling The Bench Seat seat toward the front of the vehicle. The seat 1. To reinstall the bench seat, align the seats can now be removed through either sliding front attachments into the detent positions side door, or through the liftgate.
  • Page 34 GETTING TO KNOW YOUR VEHICLE NOTE: Fold-Flat — Quad Seats Seat can be removed easier with one outboard To fold the seat, lift the recliner lever to the full seat stowed in the load floor. upward position and push the seatback forward To reinstall the seat, align the seat into the detent until it rests on the seat cushion.
  • Page 35 GETTING TO KNOW YOUR VEHICLE WARNING! Do not use this feature with a child in seat. Serious injury or death may occur. Easy Entry — With The Seat Folded Flat The seats can be folded and tilted for more accessibility for passengers to enter and exit the third row.
  • Page 36 GETTING TO KNOW YOUR VEHICLE Second Row Removable Quad Seat 2. To put it back into position, pull back on the folded seat and make sure that it locks into The second row quad seats, not equipped with the position. Then, pull the seatback toward the Stow ‘n Go feature, are removable for added cargo back and fold down the arm rests.
  • Page 37 GETTING TO KNOW YOUR VEHICLE 6. The seat assembly can now be removed from 3. Lift the recline handle and return the seat back the vehicle. Grab the front seatback edge to the seating position. located near the head restraint and the grab the bar on the rear side of the seat cushion for WARNING! easy removal.
  • Page 38 GETTING TO KNOW YOUR VEHICLE To Unfold Third Row Seats 3. Pull release strap marked “2” and tumble the 3. Raise the head restraint to its upright position. seat rearward into the storage bin. 1. Pull up on the assist strap to lift the seat out of the storage bin and push the seat forward WARNING! until the anchors latch.
  • Page 39 GETTING TO KNOW YOUR VEHICLE The Auto Advance ‘n Return feature is available to Using the Auto Advance ‘n Return Feature NOTE: the front driver power seats. NOTE: To abort seat operation while seat is in motion,  push the Auto Advance ‘n Return button, or The button is only functional when the power ...
  • Page 40 GETTING TO KNOW YOUR VEHICLE SECOND ROW STOW 'N GO NOTE: Push the lock rod inward for the locked To stow the seat in the floor, move the front seat all  position. the way forward using the manual seat adjustment bar.
  • Page 41 GETTING TO KNOW YOUR VEHICLE 6. Push down on the seatback to lock the seat CAUTION! into the storage area. The storage bin cover must be latched and flat  to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover.
  • Page 42 GETTING TO KNOW YOUR VEHICLE NOTE: Push the lock rod inward for the locked  position. Pull outward on the lock rod for the  unlocked position. 2. Pull the latch located near the second row seat to open the floor panel. Push Panel Forward Pull Strap 4.
  • Page 43: Power Adjustment (Front Seats)

    GETTING TO KNOW YOUR VEHICLE ) — 7. Lay the floor panel flat and push down until it OWER DJUSTMENT RONT EATS WARNING! clicks into position. QUIPPED Adjusting a seat while driving may be  Some models may be equipped with an eight-way dangerous.
  • Page 44 GETTING TO KNOW YOUR VEHICLE Adjusting The Seat Forward Or Rearward Power Lumbar — If Equipped WARNING! The seat can be adjusted both forward and Adjusting a seat while driving may be  rearward by using the seat switch. The seat will dangerous.
  • Page 45: Heated Seats

    GETTING TO KNOW YOUR VEHICLE When the ignition is placed in the OFF position, EATED EATS  WARNING! the driver seat will move about 2.4 inches Front Heated Seats — If Equipped (60 mm) rearward if the driver seat position is Persons who are unable to feel pain to the ...
  • Page 46: Head Restraints

    GETTING TO KNOW YOUR VEHICLE NOTE: To adjust the armrest height, push and hold the WARNING! button while moving the armrest to the desired To remove the head restraint, raise it as far as it position. Release the button to lock the armrest can go.
  • Page 47 GETTING TO KNOW YOUR VEHICLE NOTE: WARNING! If equipped with Stow ‘n Go seating, the head A loose head restraint thrown forward in a restraints are non-adjustable and non-removable.  Do not pull on non-adjustable head restraints collision or hard stop could cause serious when folding the seat.
  • Page 48 GETTING TO KNOW YOUR VEHICLE To raise the head restraint, pull upward on the WARNING! head restraint. To lower the head restraint, push the adjustment button, located at the base of the A loose head restraint thrown forward in a ...
  • Page 49: Uconnect Voice Recognition

    GETTING TO KNOW YOUR VEHICLE A passenger can press the VR button shortcut ASIC OICE OMMANDS  on the radio status bar to also issue a The basic Voice Commands below can be given at command. any point while using your Uconnect system. You can interrupt the help message or system ...
  • Page 50: Additional Information

    GETTING TO KNOW YOUR VEHICLE This feature is disabled when the vehicle is in DDITIONAL NFORMATION  REVERSE. © 2021 FCA US LLC. All rights reserved. Mopar and Uconnect are registered trademarks and Mopar Owner Connect is a trademark of FCA US LLC. Android™...
  • Page 51: Outside Mirrors

    GETTING TO KNOW YOUR VEHICLE ONVERSATION IRROR Located in the overhead console there is a conversation mirror to view all the passengers in the vehicle. Push the panel to release the drop down mirror. Raise the mirror and push to latch it back in the stowed position.
  • Page 52: Outside Mirrors Folding Feature

    GETTING TO KNOW YOUR VEHICLE Use this QR code to access your UTSIDE IRRORS OLDING EATURE EFORE EGIN ROGRAMMING digital experience. ® All outside mirrors are hinged and may be moved HomeLink® replaces up to  either forward or rearward to resist damage. The For efficient programming and accurate three hand-held transmitters hinges have three detent positions:...
  • Page 53: Identifying Whether You Have A Rolling

    GETTING TO KNOW YOUR VEHICLE NOTE: Non-rolling Code Devices NOTE: Erasing all channels should only be performed Make sure the garage door opener motor Most devices manufactured before 1995 will not when programming HomeLink® for the first time. is plugged in before moving on to the rolling have a rolling code.
  • Page 54: Miscellaneous Device

    GETTING TO KNOW YOUR VEHICLE ® T Non-Rolling Code Garage Door Opener Final Steps 1. Place the ignition in the ON/RUN position, ROGRAMMING without starting the engine. 1. Push and hold the programmed HomeLink® ISCELLANEOUS EVICE button and observe the HomeLink® indicator 2.
  • Page 55: Security

    GETTING TO KNOW YOUR VEHICLE It may be helpful to unplug the device during the NOTE: ECURITY cycling process to prevent possible overheating of If the indicator light stays on constantly,  It is advised to erase all channels before you sell or the garage door or gate motor.
  • Page 56: Exterior Lights

    GETTING TO KNOW YOUR VEHICLE EXTERIOR LIGHTS If you have any problems, or require assistance, EADLIGHT WITCH please call toll-free 1-800-355-3515 or, on the The headlight switch is located on the left side of HomeLink.com Internet at for information or ULTIFUNCTION EVER the instrument panel.
  • Page 57: Daytime Running Lights (Drls) - If Equipped

    GETTING TO KNOW YOUR VEHICLE NOTE: WITCH For vehicles sold in Canada, rotate the headlight Push the multifunction lever toward the instrument switch clockwise from the parking light and panel to switch the headlights to high beams. instrument panel light position to the first detent to Pulling the multifunction lever back will turn the turn on the headlights also.
  • Page 58: Headlight Time Delay - If Equipped

    GETTING TO KNOW YOUR VEHICLE — I EADLIGHT ELAY QUIPPED IGHTS EMINDER This feature provides the safety of headlight If the headlights or the parking lights are left on illumination for up to 90 seconds after exiting your after the ignition is placed in the OFF position, the vehicle.
  • Page 59: Lane Change Assist - If Equipped

    GETTING TO KNOW YOUR VEHICLE INTERIOR LIGHTS Turn Signal Warning NOTE: Before exiting the vehicle, make sure that the If the vehicle electronics sense that the vehicle has  NTERIOR OURTESY IGHTS interior lights are turned off. This will prevent the traveled for about 1 mile (1.6 km) with a turn battery from discharging once the doors are signal on, a chime will sound and a message will...
  • Page 60: Windshield Wiper And Washers

    GETTING TO KNOW YOUR VEHICLE Dimmer Controls Parade Mode (Daytime Brightness Feature) The dimmer controls are part of the headlight switch, and are located on the driver’s side of the Rotate the instrument panel dimmer control instrument panel. upward to the first detent. This feature brightens all text displays such as the odometer, instrument With the parking lights or headlights on, rotating cluster display, and radio when the position lights...
  • Page 61 GETTING TO KNOW YOUR VEHICLE Windshield Washers WARNING! To use the washer, pull the lever rearward toward Sudden loss of visibility through the windshield you and hold. If the lever is pulled while on the could lead to a collision. You might not see other intermittent setting, the wipers will turn on and vehicles or other obstacles.
  • Page 62: Rear Wiper And Washer

    GETTING TO KNOW YOUR VEHICLE CLIMATE CONTROLS NOTE: IPER ASHER The MAX A/C setting is only available on the touch- The rear wiper/washer is operated by rotating a screen. ANUAL LIMATE ONTROL switch, located at the middle of the lever. A/C Button ESCRIPTIONS UNCTIONS...
  • Page 63 GETTING TO KNOW YOUR VEHICLE Recirculation Button Front Defrost Button CAUTION! Press and release this button to change Press and release the Front Defrost Failure to follow these cautions can cause the system between recirculation mode button to change the current airflow damage to the heating elements: and outside air mode.
  • Page 64 GETTING TO KNOW YOUR VEHICLE Front Temperature Control NOTE: Faceplate: Push the button in the center of the knob to change the airflow distribution mode. The SYNC setting is only available on the touch- These buttons provide the driver and passenger screen.
  • Page 65 GETTING TO KNOW YOUR VEHICLE Floor Mode To change the rear system settings: REAR TEMPERATURE CONTROL Press the "Rear Climate" button on the touch- Air comes from the floor outlets. A slight These buttons provide the rear passengers with  screen to display the rear climate controls.
  • Page 66 GETTING TO KNOW YOUR VEHICLE BLOWER CONTROL NOTE: The rear system temperature control buttons are located on the headliner on the passenger side of Bi-Level Mode is designed under comfort condi- Blower Control is used to regulate the the vehicle. tions to provide cooler air out of the panel outlets amount of air forced through the Climate and warmer air from the floor outlets.
  • Page 67: Operating Tips

    GETTING TO KNOW YOUR VEHICLE REAR TEMPERATURE CONTROL BI-LEVEL MODE Summer Operation Push the up arrow button to raise the Air comes from both the headliner outlets The engine cooling system must be protected with temperature. The rear temperature and the floor outlets. a high-quality antifreeze coolant to provide proper settings are displayed in control head.
  • Page 68: Interior Storage And Equipment

    GETTING TO KNOW YOUR VEHICLE Outside Air Intake WEATHER CONTROL SETTINGS Make sure the air intake, located directly in front of Operate in (Bi-Level the windshield, is free of obstructions, such as Cool Sunny Mode. leaves. Leaves collected in the air intake may reduce airflow, and if they enter the air distribution Set the mode control to box, they could plug the water drains.
  • Page 69 GETTING TO KNOW YOUR VEHICLE Overhead Sunglass Storage At the front of the overhead console, a compartment is provided for the storage of one pair of sunglasses. From the closed position, push the indentation to open the compartment. Drawer Access Button Front Seatback Storage Second Row Floor Storage Bins CAUTION!
  • Page 70 GETTING TO KNOW YOUR VEHICLE 1. To access the storage bins with front seats in CAUTION! the rearward position, place the lock rod in the unlocked position so the load floor can The storage bin cover must lay flat and be fold upwards towards the seatback.
  • Page 71: Sun Screens - If Equipped

    GETTING TO KNOW YOUR VEHICLE Once the screen is completely to the top of the WARNING! window, extend the top bar of the sun screen over the two hooks attached to the top of the window. Do not operate the storage bin covers while ...
  • Page 72: Power Outlets

    GETTING TO KNOW YOUR VEHICLE NOTE: NOTE: There are multiple USB “Charge Only” ports in this vehicle. Two devices can be plugged in at the same time, The USB “Charge Only” ports will recharge battery and both ports will provide charging capabilities. operated USB devices when connected.
  • Page 73 GETTING TO KNOW YOUR VEHICLE The power outlets can be labeled with either a In addition to the front power outlets, there is also “key” or a “battery” symbol to indicate how the a power outlet located in the rear cargo area. outlet is powered.
  • Page 74: Windows

    GETTING TO KNOW YOUR VEHICLE CAUTION! Many accessories that can be plugged in draw  power from the vehicle's battery, even when not in use (i.e., cellular phones, etc.). Eventu- ally, if plugged in long enough, the vehicle's battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting.
  • Page 75: Automatic Window Features

    GETTING TO KNOW YOUR VEHICLE NOTE: Auto-Up Feature With Anti-Pinch Protection Power Window controls will also remain active for Lift the window switch fully upward to the second up to 10 minutes after the ignition has been detent, release, and the window will go up placed in the OFF position, depending upon the automatically.
  • Page 76: Reset Auto Up

    GETTING TO KNOW YOUR VEHICLE HOOD ESET To reactivate the Auto Up feature, perform the PENING following steps after vehicle power is restored: The hood release lever (to open the primary latch) 1. Pull the window control up to close the and safety latch (to open the secondary latch) window completely and continue to hold the must be released to open the hood.
  • Page 77: Closing

    GETTING TO KNOW YOUR VEHICLE LIFTGATE LOSING 1. Hold up the hood with one hand and with the NLOCK IFTGATE other hand remove the support rod from its seat and reinsert it into the locking tab. The liftgate may be released in several ways: 2.
  • Page 78: To Lock/Close The Liftgate

    GETTING TO KNOW YOUR VEHICLE — I LOSE IFTGATE OWER IFTGATE QUIPPED To manually close the liftgate, grab the liftgate The power liftgate may be opened or closed in closing handle and pull in a downward motion. several ways: With a valid Passive Entry key fob within 5 ft Overhead console liftgate button ...
  • Page 79: Cargo Area Features

    GETTING TO KNOW YOUR VEHICLE STOW ‘N PLACE ROOF RACK — IF EQUIPPED NOTE: ARGO EATURES Tones are sounded and the turn signals are Cargo Area Storage The crossbars and side rails are designed to carry flashed with liftgate movements. These alerts can weight on vehicles equipped with a luggage rack.
  • Page 80: Deploying The Crossbars

    GETTING TO KNOW YOUR VEHICLE NOTE: The Stow ‘N Place roof rack does not increase the 2. Bend the crossbar supports at each end, total load carrying capacity of the vehicle. Be sure taking care to keep hand clear of pivoting joint. The thumb screws cannot be fully removed.
  • Page 81: Stowing The Crossbars

    GETTING TO KNOW YOUR VEHICLE NOTE: The crossbars are not identical and have fixed deployment positions. Rear crossbar can be deployed in two different positions. TOWING ROSSBARS 1. Starting with one crossbar, completely loosen the thumb screws at both ends. Lift the crossbar away from the matching letter to remove it from the deployed position.
  • Page 82 GETTING TO KNOW YOUR VEHICLE 5. Once the driver’s side crossbar is in place, CAUTION! tighten the thumb screws completely. Use care when removing and handling the crossbars to prevent damage to the vehicle. 2. Starting with the one crossbar, bend up the pivot supports at each end.
  • Page 83 GETTING TO KNOW YOUR VEHICLE NOTE: CAUTION! CAUTION! To help control wind noise, stow the crossbars in  To prevent damage to the roof of your vehicle, Travel at reduced speeds and turn corners the side rails when they are not in use. ...
  • Page 84: Getting To Know Your Instrument Panel

    GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER...
  • Page 85: Instrument Cluster Descriptions

    GETTING TO KNOW YOUR INSTRUMENT PANEL 5. Fuel Gauge NSTRUMENT LUSTER ESCRIPTIONS WARNING! The gauge shows the level of fuel in the  1. Tachometer Driving with a hot engine cooling system could fuel tank when the ignition switch is in the Indicates the engine speed in revolutions damage your vehicle.
  • Page 86: Instrument Cluster

    GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER...
  • Page 87: Instrument Cluster Descriptions

    GETTING TO KNOW YOUR INSTRUMENT PANEL 5. Fuel Gauge NSTRUMENT LUSTER ESCRIPTIONS WARNING! The gauge shows the level of fuel in the  1. Tachometer Driving with a hot engine cooling system could fuel tank when the ignition switch is in the Indicates the engine speed in revolutions damage your vehicle.
  • Page 88: Instrument Cluster Display Location And

    GETTING TO KNOW YOUR INSTRUMENT PANEL The instrument cluster display controls allows the Back / Left Arrow Button NSTRUMENT LUSTER ISPLAY  driver to select information by pushing the OCATION ONTROLS Push and release the left arrow button to directional buttons mounted on the steering access the information screens or submenu wheel: The vehicle’s instrument cluster is equipped with...
  • Page 89: Oil Life Reset

    GETTING TO KNOW YOUR INSTRUMENT PANEL The instrument cluster display (base/premium Unless reset, this message will continue to Secondary Method For Oil Life Reset Procedure  cluster) features a driver interactive display that is display each time the ignition is cycled to the 1.
  • Page 90: Instrument Cluster Display Menu Items

    GETTING TO KNOW YOUR INSTRUMENT PANEL Setting Instrument Cluster Display Message None – With vehicle ignition ON “KeySense in use. Max vehicle speed set to xx MPH/or km/h” “Max speed reached. KeySense in use” supported by a chime  Max Vehicle Speed “Approaching max speed xx MPH/km/h”...
  • Page 91 GETTING TO KNOW YOUR INSTRUMENT PANEL Tire Pressure Oil Pressure Fuel Economy If tire pressure is OK for all tires, a vehicle ICON is Displays the actual oil pressure. Push and release the up or down arrow displayed with tire pressure values in each corner Oil Life button until the Fuel Economy Menu item is of the ICON.
  • Page 92 GETTING TO KNOW YOUR INSTRUMENT PANEL Trip Info Stop / Start – If Equipped Screen Setup Push and release the up or down arrow Push and release the up or down arrow Push and release the up or down arrow button until the Trip Menu item is highlighted in the button until the Stop/Start menu title is displayed button until the Screen Setup Menu displays in the...
  • Page 93 GETTING TO KNOW YOUR INSTRUMENT PANEL Base Instrument Cluster Display Screen Setup Options: None  Compass  Outside Temp  1 — Upper Left Time  Range  Current (MPG, L/100km, or km/L)  Average (MPG, L/100km, or km/L)  None ...
  • Page 94 GETTING TO KNOW YOUR INSTRUMENT PANEL Base Instrument Cluster Display Screen Setup Options: None  Compass  Outside Temp  Time  Range  Average (MPG, L/100km, or km/L)  3 — Center Current (MPG, L/100km, or km/L)  Trip A Distance ...
  • Page 95: Battery Saver On/Battery Saver Mode Message - Electrical Load Reduction Actions - If Equipped

    GETTING TO KNOW YOUR INSTRUMENT PANEL Speed Warning — If Equipped These messages indicate the vehicle battery has a ATTERY AVER ATTERY AVER low state of charge and continues to lose electrical — E ESSAGE LECTRICAL Push and release the up or down arrow charge at a rate that the charging system cannot...
  • Page 96: Trip Computer

    GETTING TO KNOW YOUR INSTRUMENT PANEL TRIP COMPUTER Loss of the battery charge may indicate one or What to do when an electrical load reduction more of the following conditions: action message is present (“Battery Saver On” or The Trip Computer is located in the instrument “Battery Saver Mode”) The charging system cannot deliver enough ...
  • Page 97: Warning Lights And Messages

    GETTING TO KNOW YOUR INSTRUMENT PANEL Trip B is low, or that there is a problem with the Anti-Lock ARNING IGHTS Brake System reservoir. Shows the total distance traveled for Trip B  Air Bag Warning Light since the last reset. If the light remains on when the parking brake has This warning light will illuminate to been disengaged, and the fluid level is at the full...
  • Page 98 GETTING TO KNOW YOUR INSTRUMENT PANEL NOTE: Electronic Throttle Control (ETC) Warning WARNING! This light shows only that the parking brake is Light applied. It does not show the degree of brake appli- Driving a vehicle with the red brake light on is This warning light will illuminate to cation.
  • Page 99 GETTING TO KNOW YOUR INSTRUMENT PANEL Engine Coolant Temperature Warning Liftgate Open Warning Light Seat Belt Reminder Warning Light Light This warning light will illuminate when the This warning light indicates when the liftgate is open. driver or passenger seat belt is This warning light warns of an unbuckled.
  • Page 100: Yellow Warning Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL If the ABS light remains on or turns on while detected in the ESC system. If this warning light CAUTION! driving, then the Anti-Lock portion of the brake remains on after several ignition cycles, and the system is not functioning and service is required as vehicle has been driven several miles (kilometers) Continuous driving with the Transmission...
  • Page 101 GETTING TO KNOW YOUR INSTRUMENT PANEL Engine Check/Malfunction Indicator Low Fuel Warning Light WARNING! Warning Light When the fuel level reaches A malfunctioning catalytic converter, as approximately 1.85 gal (7 L) this warning The Engine Check/Malfunction Indicator referenced above, can reach higher light will turn on, and remain on until fuel Light (MIL) is a part of an Onboard temperatures than in normal operating...
  • Page 102 GETTING TO KNOW YOUR INSTRUMENT PANEL Tire Pressure Monitoring System (TPMS) start-ups as long as the malfunction exists. When a different size than the size indicated on the vehicle placard or tire inflation pressure label, you the malfunction indicator is illuminated, the Warning Light should determine the proper tire inflation pressure system may not be able to detect or signal low tire...
  • Page 103: Yellow Indicator Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL Parking/Headlight On Indicator Light ELLOW NDICATOR IGHTS HITE NDICATOR IGHTS This indicator light will illuminate when Automatic Emergency Braking (AEB) OFF Cruise Control Ready Indicator Light the park lights or headlights are turned Indicator Light — If Equipped This indicator light will illuminate when the cruise control is ready, but not set This indicator light illuminates to indicate...
  • Page 104: Onboard Diagnostic System - Obd Ii

    GETTING TO KNOW YOUR INSTRUMENT PANEL ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! WARNING! Your vehicle is equipped with a sophisticated Prolonged driving with the MIL on could cause ONLY an authorized service technician should   Onboard Diagnostic system called OBD II. This further damage to the emission control connect equipment to the OBD II connection system monitors the performance of the...
  • Page 105: Emissions Inspection And Maintenance Programs

    GETTING TO KNOW YOUR INSTRUMENT PANEL EMISSIONS INSPECTION AND 1. Cycle the ignition switch to the ON position, If your OBD II system is not ready, you should see but do not crank or start the engine. an authorized dealer or repair facility. If your MAINTENANCE PROGRAMS vehicle was recently serviced or had a battery NOTE:...
  • Page 106: Starting And Operating

    STARTING AND OPERATING STARTING THE ENGINE ENGINE START/STOP Button Functions — With WARNING! Driver’s Foot OFF The Brake Pedal (In PARK Or Before starting your vehicle, adjust your seat, NEUTRAL Position) Do not leave children or animals inside parked  adjust both inside and outside mirrors, and fasten vehicles in hot weather.
  • Page 107: Autopark

    STARTING AND OPERATING ALWAYS DO A VISUAL CHECK that your vehicle is in If the vehicle is not in PARK and the driver exits the PARK by looking for the “P” in the instrument vehicle with the engine running, if certain AutoPark is a supplemental feature to assist in cluster display and on the gear selector.
  • Page 108 STARTING AND OPERATING AutoPark In Stop/Start Autostop Mode WARNING! WARNING! AutoPark will engage when all of these conditions The transmission may not engage PARK if the When exiting the vehicle, always make sure are met:   vehicle is moving. Always bring the vehicle to a the ignition is in the OFF position, remove the Vehicle is equipped with a gear selector ...
  • Page 109: Cold Weather Operation

    STARTING AND OPERATING — W If the driver shifts into PARK while moving, the FTER TARTING ARMING CAUTION! vehicle may Park. NGINE Damage to the transmission may occur if the PARK will engage ONLY when vehicle speed is following precautions are not observed: The idle speed is controlled automatically and it 1.2 mph (1.9 km/h) or less.
  • Page 110: To Turn Off The Engine Using Engine

    STARTING AND OPERATING ENGINE BLOCK HEATER — IF EQUIPPED NOTE: NGINE SING ENGINE START/STOP B The engine block heater cord is a factory  UTTON The engine block heater warms the engine and installed option. If your vehicle is not equipped, permits quicker starts in cold weather.
  • Page 111: Parking Brake

    STARTING AND OPERATING While cruising, brief full-throttle acceleration within The parking brake is primarily intended to prevent If your foot is on the brake pedal while you apply the limits of local traffic laws contributes to a good the vehicle from rolling while parked. Before the parking brake, you may notice a small amount break-in.
  • Page 112 STARTING AND OPERATING You may hear a sound from the back of the vehicle WARNING! CAUTION! while the parking brake disengages. You may also notice a small amount of movement in the brake If the Brake System Warning Light remains on Never leave children alone in a vehicle, or with ...
  • Page 113: Automatic Transmission

    STARTING AND OPERATING Auto Park Brake When servicing your rear brakes, it may be WARNING! necessary for you or your technician to push the The Electric Park Brake (EPB) can be programmed rear piston into the rear caliper bore. With the You can be badly injured working on or around a to be applied automatically whenever the vehicle is Electric Park Brake (EPB) system, this can only be...
  • Page 114: Ignition Park Interlock

    STARTING AND OPERATING WARNING! WARNING! CAUTION! The transmission may not engage PARK if the When exiting the vehicle, always make sure Damage to the transmission may occur if the   vehicle is moving. Always bring the vehicle to a the ignition is in the OFF position, remove the following precautions are not observed: complete stop before shifting to PARK, and...
  • Page 115: Brake/Transmission Shift Interlock (Btsi) System

    STARTING AND OPERATING NOTE: RAKE RANSMISSION HIFT In the event of a mismatch between the gear (BTSI) S NTERLOCK YSTEM selector position and the actual transmission gear (for example, driver selects PARK while driving), This vehicle is equipped with a BTSI that holds the the position indicator will blink continuously until transmission gear selector in PARK unless the the selector is returned to the proper position, or...
  • Page 116 STARTING AND OPERATING When parking on a hill, apply the parking brake WARNING! WARNING! before shifting the transmission to PARK. As an added precaution, turn the front wheels toward the The transmission may not engage PARK if the When exiting the vehicle, always make sure ...
  • Page 117 STARTING AND OPERATING The following indicators should be used to ensure During cold temperatures, transmission operation CAUTION! may be modified depending on engine and that you have properly engaged the transmission into the PARK position: transmission temperature as well as vehicle Towing the vehicle, coasting, or driving for any speed.
  • Page 118: Active Noise Cancellation

    STARTING AND OPERATING ACTIVE NOISE CANCELLATION Torque Converter Clutch In the event of a momentary problem, the transmission can be reset to regain all forward A feature designed to improve fuel economy has Your vehicle is equipped with an Active Noise gears by performing the following steps: been included in the automatic transmission on Cancellation system.
  • Page 119: Stop/Start System - If Equipped

    STARTING AND OPERATING STOP/START SYSTEM — IF EQUIPPED If the Steering icon is displayed and the “POWER The engine will shut down, the tachometer will STEERING SYSTEM OVER TEMP” message is move to the zero position and the Stop/Start The Stop/Start function is developed to reduce displayed on the instrument cluster screen, this telltale will illuminate indicating you are in fuel consumption.
  • Page 120: To Start The Engine While In Auto

    STARTING AND OPERATING HVAC is set to full defrost mode at a high blower  TART NGINE HILE ANUALLY speed. TART TART YSTEM HVAC is set to MAX A/C.  While in a forward gear, the engine will start when Engine has not reached normal operating ...
  • Page 121: To Manually Turn On The Stop/Start

    STARTING AND OPERATING ANUALLY RUISE ONTROL WARNING! TART YSTEM When engaged, the Cruise Control takes over Cruise Control can be dangerous where the accelerator operations at speeds greater than After turning off the Stop/Start system, push the system cannot maintain a constant speed. Your 25 mph (40 km/h).
  • Page 122 STARTING AND OPERATING To Set A Desired Speed Metric Speed (km/h) WARNING! Pushing the SET (+), or SET (-) button once will Turn the Cruise Control on.  Cruise Control can be dangerous where the result in a 1 km/h speed adjustment. Each NOTE: system cannot maintain a constant speed.
  • Page 123: Parksense Rear Park Assist

    STARTING AND OPERATING PARKSENSE REAR PARK ASSIST — The automatic braking function may not provide NOTE:  enough vehicle deceleration to avoid colliding The system is provided to assist the driver and  IF EQUIPPED with a detected obstacle depending on vehicle not to substitute the driver.
  • Page 124: Parksense Sensors

    STARTING AND OPERATING If an obstacle is detected in the center rear region, ENSE ENSORS ENSE ARNING ISPLAY the display will show a single solid arc in the center The four ParkSense sensors, located in the rear The ParkSense Warning screen will only be rear region and will produce a one-half second fascia/bumper, monitor the area behind the displayed if Sound and Display is selected from the...
  • Page 125 STARTING AND OPERATING Rear ParkSense Arcs 1 — Continuous Tone/Flashing Arc 4 — Slow Tone/Solid Arc 2 — Fast Tone/Flashing Arc 5 — Slow Tone/Solid Arc 3 — Fast Tone/Flashing Arc 6 — Single 1/2 Second Tone/Solid Arc...
  • Page 126 STARTING AND OPERATING The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: WARNING ALERTS Greater than Less than Rear Distance...
  • Page 127: Enabling And Disabling Parksense

    STARTING AND OPERATING NABLING ISABLING ENSE ERVICE ENSE LEANING ENSE YSTEM SSIST YSTEM ParkSense can be enabled and disabled Clean the ParkSense sensors with water, car wash with the ParkSense switch, located on soap, and a soft cloth. Do not use rough or hard During vehicle start up, when the ParkSense Rear the switch panel below the Uconnect cloths.
  • Page 128: Parkview Rear Back Up Camera

    STARTING AND OPERATING ParkSense, when on, will reduce the volume of  WARNING! CAUTION! the radio when it is sounding a tone. Drivers must be careful when backing up even ParkSense is only a parking aid and it is  ...
  • Page 129: Refueling The Vehicle

    STARTING AND OPERATING NOTE: Distance To The Rear Of CAUTION! Zone The ParkView Rear Back Up Camera has program- The Vehicle mable modes of operation that may be selected To avoid vehicle damage, ParkView should  0 - 1 ft through the Uconnect system page 141.
  • Page 130: Vehicle Loading

    STARTING AND OPERATING 3. Insert the fuel nozzle fully into the filler pipe; This label contains the month and year of CAUTION! the nozzle opens and holds both flapper doors manufacture, Gross Vehicle Weight Rating while refueling. (GVWR), front and rear Gross Axle Weight Rating To avoid fuel spillage and overfilling, do not “top (GAWR), and Vehicle Identification Number (VIN).
  • Page 131: Trailer Towing

    STARTING AND OPERATING Each axle GAWR is determined by the components Loading CAUTION! in the system with the lowest load carrying capacity The actual total weight and the weight of the front (axle, springs, tires or wheels). Heavier axles or Do not load your vehicle any heavier than the and rear of your vehicle at the ground can best be suspension components sometimes specified by...
  • Page 132: Common Towing Definitions

    STARTING AND OPERATING Gross Axle Weight Rating (GAWR) Trailer Sway Control (TSC) OMMON OWING EFINITIONS The GAWR is the maximum capacity of the front The TSC can be a mechanical telescoping link that The following trailer towing related definitions will and rear axles.
  • Page 133: Trailer Hitch Classification

    STARTING AND OPERATING Weight-Distributing Hitch A Weight-Distributing Hitch works by applying leverage through spring (load) bars. They are typically used for heavier loads to distribute trailer tongue weight to the tow vehicle's front axle and the trailer axle(s). When used in accordance with manufacturer’s directions, it provides for a more level ride, offering more consistent steering and brake control thereby enhancing towing safety.
  • Page 134: Trailer Towing Weights

    STARTING AND OPERATING RAILER OWING EIGHTS AXIMUM RAILER EIGHT ATINGS The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Trailer Tow Engine/Transmission GCWR Frontal Area Maximum GTW Maximum Trailer TW Package 8,600 lb (3,900 kg) 40 sq ft (3.72 sq m) 3,600 lb (1,632 kg) 360 lb (163 kg)
  • Page 135 STARTING AND OPERATING Max Cargo With Number Of Persons / Weight Of Occupants Max Cargo No Trailer Maximum Trailer TW Maximum TW 360 lb (136 kg) 1,205 lb (546 kg) – 360 lb (136 kg) = 845 lb (383 kg) 2 People / 300 lb (136 kg) 1,205 lb (546 kg) 845 lb (383 kg)
  • Page 136: Trailer And Tongue Weight

    STARTING AND OPERATING NOTE: Perform the maintenance listed in the “Scheduled RAILER ONGUE EIGHT Remember that everything put into or on the trailer Servicing” page 243. When towing a trailer, Ú Never exceed the maximum tongue weight adds to the load on your vehicle. Also, additional never exceed the GAWR or GCWR ratings.
  • Page 137 STARTING AND OPERATING Check the trailer tires for proper tire inflation  WARNING! WARNING! pressures before trailer usage. Do not connect trailer brakes to your vehicle's Vehicles with trailers should not be parked on   Check for signs of tire wear or visible tire ...
  • Page 138: Towing Tips

    STARTING AND OPERATING The Trailer Tow Package may include a four and OWING 1 — Ground seven-pin wiring harness. Use a factory approved 2 — Park Before towing, practice turning, stopping, and trailer harness and connector. 3 — Left Stop/Turn backing up the trailer in an area located away from NOTE: 4 —...
  • Page 139: Recreational Towing (Behind Motorhome)

    STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME) OWING EHICLE EHIND NOTHER EHICLE Towing Condition Wheel OFF The Ground FWD Models Flat Tow NONE NOT ALLOWED Front Dolly Tow Rear NOT ALLOWED On Trailer NOTE: Recreational Towing CAUTION! To avoid inadvertent Electric Park Brake (EPB) Front-Wheel Drive (FWD) Models ...
  • Page 140: Driving Tips

    STARTING AND OPERATING 7. Turn the ignition to the ON/RUN position, but Keep tires properly inflated.  WARNING! do not start the vehicle. Maintain sufficient distance between your  Rapid acceleration on slippery surfaces is 8. Press and hold the brake pedal. vehicle and the vehicle in front of you to avoid a dangerous.
  • Page 141 STARTING AND OPERATING Shallow Standing Water CAUTION! CAUTION! Although your vehicle is capable of driving through Always check the depth of the standing water Driving through standing water may cause   shallow standing water, consider the following before driving through it. Never drive through damage to your vehicle’s drivetrain compo- Warnings and Cautions before doing so.
  • Page 142: Multimedia

    MULTIMEDIA UCONNECT SYSTEMS and performance of your systems or to reduce the NOTE: potential risk of unauthorized and unlawful access FCA US LLC or your dealer may contact you  For detailed information about your Uconnect 5 to your vehicle systems. directly regarding software updates.
  • Page 143: Uconnect Settings

    MULTIMEDIA UCONNECT SETTINGS For the Uconnect 5 With 7-inch Display and the USTOMER ROGRAMMABLE EATURES Uconnect 5/5 NAV With 10.1-inch Display The Uconnect system uses a combination of Press the Vehicle button, then press the Settings buttons on the touchscreen and buttons on the tab on the top of the touchscreen.
  • Page 144 MULTIMEDIA KeySense The vehicle’s KeySense settings are protected by a unique four-digit PIN, which the vehicle owner creates when accessing the specific settings for the first time. This four-digit PIN can only be reset by an authorized dealer. After pressing the KeySense button on the touchscreen, and entering the KeySense PIN, the following settings will be available: Setting Name Description This setting will change the distance at which the Forward Collision Warning...
  • Page 145 MULTIMEDIA Setting Name Description This setting will change the type of alert provided when an object is detected in a vehicle’s blind spot. The “Lights” setting will activate the Blind Spot Alert Blind Spot Alert — If Equipped lights on the outside mirrors. The “Lights & Chime” setting will activate both the lights on the outside mirrors and an audible chime.
  • Page 146 MULTIMEDIA Setting Name Description This setting will allow you to set the brightness when the headlights are off. To Display Brightness With Headlights OFF/Brightness access this setting, Display Mode must be set to Manual. The “+” setting will increase the brightness; the “-” will decrease the brightness. Set Theme This setting will allow you to change the theme of the radio.
  • Page 147 MULTIMEDIA Safety & Driving Assistance After pressing the Safety & Driving Assistance button on the touchscreen, the following settings will be available: Setting Name Description This setting will change the distance at which the Forward Collision Warning (FCW) alert sounds. The “Medium” setting will have the FCW system signal Forward Collision Warning Sensitivity —...
  • Page 148 MULTIMEDIA Setting Name Description This setting will change the type of alert provided when an object is detected in a vehicle’s blind spot. The “Off” setting will turn off Blind Spot Alert. The Blind Spot Alert — If Equipped “Lights” setting will activate the Blind Spot Alert lights on the outside mirrors. The “Lights &...
  • Page 149 MULTIMEDIA Setting Name Description This setting will allow you to set the hours. Sync Time With GPS must be off for Set Time Hours — If Equipped this setting to be available. The “+” setting will increase the hours. The “-” setting will decrease the hours.
  • Page 150 This setting will allow you to turn the voice recognition “Wake Up” word on or Wake Up Word off. The available options are “Off”, “Hey Uconnect”, and “Hey Chrysler”. This setting will allow you to turn the voice recognition barge-in feature Voice Barge-In on or off.
  • Page 151 MULTIMEDIA Camera When the Camera button is pressed on the touchscreen, the system displays the options related to the vehicle’s camera features. Setting Name Description This setting will add a timed delay to the ParkView Backup Camera when ParkView Backup Camera Delay shifting out of REVERSE.
  • Page 152 MULTIMEDIA Lights When the Lights button is pressed on the touchscreen, the system displays the options related to the vehicle’s exterior and interior lights. NOTE: When the “Daytime Running Lights” feature is selected, the daytime running lights can be turned on or off. This feature is only allowed by law in the country of the vehicle purchased.
  • Page 153 MULTIMEDIA Brakes After pressing the Brakes button on the touchscreen, the following settings will be available: Setting Name Description Auto Park Brake This setting will turn the Auto Park Brake on or off. Brake Service This setting will allow you to retract the brakes for servicing. Doors &...
  • Page 154 MULTIMEDIA Setting Name Description This setting will sound the horn when the Lock button is pushed on the key fob. The “Off” setting will not sound the horn when the Lock button is pushed. Sound Horn With Lock The “1st Press” setting will sound the horn when the Lock button is pushed once.
  • Page 155 MULTIMEDIA Seats & Comfort When the Seats & Comfort button is pressed on the touchscreen, the system displays the options related to the vehicle’s comfort systems when remote start has been activated or the vehicle has been started. Setting Name Description This setting will activate the vehicle’s comfort systems and heated seats or heated steering wheel when the vehicle is remote started or ignition is...
  • Page 156 MULTIMEDIA Audio When the Audio button is pressed on the touchscreen, the system displays options related to the vehicle’s sound system. These settings can change the audio location within the vehicle, adjust the bass or treble levels, and auto-play settings from an audio device or smartphone. Setting Name Description This setting will adjust audio levels from specific speakers in the front/back...
  • Page 157 MULTIMEDIA SiriusXM® Setup NOTE: A subscription to SiriusXM® satellite radio is required for these settings to be functional. When the SiriusXM® Setup button is pressed on the touchscreen, the system displays options related to SiriusXM® satellite radio. These settings can be used to skip specific radio channels and restart favorite songs from the beginning.
  • Page 158 MULTIMEDIA Reset When the Reset button is pressed on the touchscreen, the system displays the options related to resetting the Uconnect system back to its default settings. These settings can clear personal data and reset selected settings from other menus. Setting Name Description Restart Radio...
  • Page 159: Radio Operation And Mobile Phones

    MULTIMEDIA RADIO OPERATION AND MOBILE PHONES The radio manufacturer believes the internal EGULATORY AFETY wireless radio is safe for use by consumers. The NFORMATION Under certain conditions, the mobile phone being level of energy emitted is far less than the on in your vehicle can cause erratic or noisy electromagnetic energy emitted by wireless US/CANADA...
  • Page 160: Safety

    SAFETY SAFETY FEATURES You also may experience the following normal WARNING! characteristics when the ABS activates: (ABS) Pumping of the Anti-Lock Brakes will diminish RAKE YSTEM  ABS motor noise or clicking sounds (you may  their effectiveness and may lead to a collision. continue to hear for a short time after the stop) The ABS provides increased vehicle stability and Pumping makes the stopping distance longer.
  • Page 161: Rear Seat Reminder Alert (Rsra)

    SAFETY (EBC) Anti-Lock Brake System (ABS) Warning Do not reduce brake pedal pressure unless LECTRONIC RAKE ONTROL braking is no longer desired. Once the brake pedal Light YSTEM is released, the BAS is deactivated. The yellow ABS Warning Light will turn on when the Your vehicle is equipped with an advanced ignition is placed in the ON/RUN mode and may WARNING!
  • Page 162 SAFETY Dynamic Steering Torque (DST) Electronic Roll Mitigation (ERM) Electronic Stability Control (ESC) DST is a feature of the ESC and Electric Power ERM anticipates the potential for wheel lift by ESC enhances directional control and stability of Steering (EPS) modules that provides torque at the monitoring the driver’s steering wheel input and the vehicle under various driving conditions.
  • Page 163 SAFETY The ESC Activation/Malfunction Indicator Light ESC On WARNING! located in the instrument cluster will start to flash This is the normal operating mode for the ESC. as soon as the ESC system becomes active. The Vehicle modifications, or failure to properly ...
  • Page 164 SAFETY Hill Start Assist (HSA) The ESC Activation/Malfunction Indicator Light WARNING! starts to flash as soon as the tires lose traction and HSA is designed to mitigate roll back from a the ESC system becomes active. The ESC When in “Partial Off” mode, the TCS function- ...
  • Page 165 SAFETY Rain Brake Support (RBS) WARNING! WARNING! RBS may improve braking performance in wet There may be situations where the Hill Start If you use a trailer brake controller with your  conditions. It will periodically apply a small amount Assist (HSA) will not activate and slight rolling trailer, the trailer brakes may be activated and of brake pressure to remove any water buildup on...
  • Page 166: Auxiliary Driving Systems

    SAFETY AUXILIARY DRIVING SYSTEMS Trailer Sway Control (TSC) The BSM detection zone covers approximately one lane width on both sides of the vehicle 12 ft TSC uses sensors in the vehicle to recognize an (3.7 m). The zone length starts at the outside (BSM) —...
  • Page 167 SAFETY The Blind Spot Monitoring (BSM) system may The BSM system monitors the detection zone from  experience dropouts (blinking on and off) of the three different entry points (side, rear, front) while side mirror warning indicator lamps when a driving to see if an alert is necessary.
  • Page 168 SAFETY Entering From The Rear The BSM system will not alert you of objects that are traveling in the opposite direction of the vehicle Vehicles that come up from behind your vehicle on in adjacent lanes page 304. Ú either side and enter the rear detection zone with a relative speed of less than 30 mph (48 km/h).
  • Page 169 SAFETY Rear Cross Path (RCP) When RCP is on and the vehicle is in REVERSE (R), Blind Spot Modes the driver is alerted using both the visual and RCP is intended to aid the driver when backing out Three selectable modes of operation are available audible alarms, including reducing the radio of parking spaces where their vision of oncoming in the Uconnect system.
  • Page 170: Forward Collision Warning (Fcw) With

    SAFETY NOTE: When the system is in RCP, the system shall respond with both visual and audible alerts when a FCW monitors the information from the forward detected object is present. Whenever an audible looking sensors as well as the Electronic Brake alert is requested, the radio is also muted.
  • Page 171 SAFETY It is unsafe to test the FCW system. To prevent NOTE: Changing the FCW status to the “Near” setting  allows the system to warn the driver of a possible such misuse of the system, after four Active The FCW system state is kept in memory from ...
  • Page 172 SAFETY FCW Limited Warning Pedestrian Emergency Braking (PEB) — Turning PEB On Or Off If Equipped NOTE: If the instrument cluster displays “ACC/FCW The default status of PEB is “On.” This allows the Limited Functionality” or “ACC/FCW Limited The Pedestrian Emergency Braking (PEB) is a system to warn you of a possible frontal collision Functionality Clean Front Windshield”...
  • Page 173: Tire Pressure Monitoring System

    SAFETY inflation pressure molded into the tire sidewall. For example, your vehicle may have a RESSURE ONITORING YSTEM The tire pressure will also increase as the vehicle recommended cold (parked for more than three (TPMS) is driven. This is normal and there should be no hours) placard pressure of 33 psi (227 kPa).
  • Page 174 SAFETY NOTE: NOTE: CAUTION! It is particularly important for you to check the tire The TPMS is not intended to replace normal tire  pressure in all of the tires on your vehicle monthly The TPMS has been optimized for the original ...
  • Page 175 SAFETY If the ignition is cycled, this sequence will repeat, 2. If you install the compact spare tire in place of instead of dashes (--), as long as no tire pressure is below the low-pressure warning providing the system fault still exists. If the system a road tire that has a pressure below the fault no longer exists, the TPMS Warning Light will low-pressure warning limit, the “Inflate to XX”...
  • Page 176: Occupant Restraint Systems

    SAFETY Should this occur, you should stop as soon as Beginning with the next ignition cycle, the TPMS Some of the safety features described in this possible and inflate the tires with low pressure will no longer chime or display the “SERVICE TPM section may be standard equipment on some (those in a different color in the instrument cluster SYSTEM”...
  • Page 177: Seat Belt Systems

    SAFETY 4. Never allow children to slide the shoulder belt Enhanced Seat Belt Use Reminder System WARNING! behind them or under their arm. (BeltAlert) Never install a rear-facing child restraint in the  5. You should read the instructions provided with Driver And Passenger BeltAlert —...
  • Page 178 SAFETY (if equipped). It is recommended that pets be BeltAlert Warning Sequence WARNING! restrained in the rear seat (if equipped) in pet The BeltAlert warning sequence is activated when harnesses or pet carriers that are secured by seat Relying on the air bags alone could lead to ...
  • Page 179 SAFETY WARNING! WARNING! WARNING! A lap belt worn too high can increase the risk Be sure everyone in your vehicle is in a seat A seat belt that is worn under your arm is    and using a seat belt properly. Occupants, of injury in a collision.
  • Page 180 SAFETY Lap/Shoulder Belt Operating Instructions 5. Position the shoulder belt across the shoulder and chest with minimal, if any slack so that it 1. Enter the vehicle and close the door. Sit back is comfortable and not resting on your neck. and adjust the seat.
  • Page 181 SAFETY Adjustable Upper Shoulder Belt Anchorage NOTE: Second Row Center (If Equipped) And Third The adjustable upper shoulder belt anchorage is Row Center Seat Belt Operating In the front and second row outboard seats the equipped with an Easy Up feature. This feature Instructions shoulder belt can be adjusted upward or allows the shoulder belt anchorage to be adjusted...
  • Page 182 SAFETY 2. Grab the mini-latch plate and pull the seat belt 4. When the seat belt is long enough to fit, insert over the seat. the mini-latch plate into the mini-buckle until you hear a “click.” Rear Center Seat Belt Buckled 1 —...
  • Page 183 SAFETY 7. Position the lap belt so that it is snug and lies Seat Belt Extender low across your hips, below your abdomen. To If a seat belt is not long enough to fit properly, even remove slack in the lap belt portion, pull up on when the webbing is fully extended and the the shoulder belt.
  • Page 184 SAFETY Seat Belts And Pregnant Women from the seat belt early in a collision. Pretensioners work for all size occupants, including those in child restraints. NOTE: These devices are not a substitute for proper seat belt placement by the occupant. The seat belt still must be worn snugly and positioned properly.
  • Page 185 SAFETY In Automatic Locking Mode, the shoulder belt is 3. Allow the seat belt to retract. As the seat belt retracts, you will hear a clicking sound. This automatically pre-locked. The seat belt will still retract to remove any slack in the shoulder belt. indicates the seat belt is now in the Automatic Use the Automatic Locking Mode anytime a child Locking Mode.
  • Page 186: Supplemental Restraint Systems (Srs)

    SAFETY Seat Belt Park Stitch — If Equipped The air bag system must be ready to protect you in a collision. The Occupant Restraint Controller The rear outboard seat belts may be equipped with (ORC) monitors the internal circuits and a park stitch to raise the latch plate for easier interconnecting wiring associated with the access to occupants.
  • Page 187 SAFETY Air Bag Warning Light nature of the malfunction. While the air bag system Redundant Air Bag Warning Light is designed to be maintenance free, if any of the The Occupant Restraint Controller (ORC) If a fault with the Air Bag Warning Light is following occurs, have an authorized dealer monitors the readiness of the electronic detected, which could affect the...
  • Page 188 SAFETY The first stage inflator is triggered immediately WARNING! during an impact that requires air bag deployment. A low energy output is used in less severe Never place a rear-facing child restraint in  collisions. A higher energy output is used for more front of an air bag.
  • Page 189 SAFETY vehicle damage — for example, some pole Occupant Classification System (OCS) — WARNING! collisions, truck underrides, and angle offset Front Passenger Seat collisions. No objects should be placed over or near the  The Occupant Classification System (OCS) is part of air bag on the instrument panel or steering On the other hand, depending on the type and a Federally regulated safety system for this vehicle.
  • Page 190 SAFETY The OCS will NOT prevent deployment of the Passenger Advanced Front Air Bag. The OCS may reduce the inflation rate of the Passenger Advanced Front Air Bag if the OCS estimates that: The front passenger seat is unoccupied or has very light objects on it; or ...
  • Page 191 SAFETY The OCS determines the front passenger’s most front passenger’s seated weight on the front passenger seat may result in a reduced-power probable classification. The OCS estimates the seated weight on the front passenger seat and deployment of the Passenger Advanced Front Air where that weight is located.
  • Page 192 SAFETY The OCS determines the front passenger’s most WARNING! probable classification. If an occupant in the front passenger seat is seated improperly, the occupant If a child restraint system, child, small teen-  may provide an output signal to the OCS that is ager or adult in the front passenger seat is different from the occupant’s properly seated seated improperly, the occupant may provide...
  • Page 193 SAFETY Do not use prior or future model year seat Knee Impact Bolsters  The Air Bag Warning Light in the instrument covers or cushions not designated by FCA US panel will turn on whenever the OCS is unable to The Knee Impact Bolsters help protect the knees LLC for the specific model being repaired.
  • Page 194 SAFETY Supplemental Side Air Bags When the SAB deploys, it opens the seam on the outboard side of the seatback’s trim cover. The Supplemental Seat-Mounted Side Air Bags (SABs) inflating SAB deploys through the seat seam into This vehicle is equipped with Supplemental the space between the occupant and the door.
  • Page 195 SAFETY deploys the left Side Air Bags only and a right-side WARNING! WARNING! impact deploys the right Side Air Bags only. Vehicle damage by itself is not a good indicator of whether Do not mount equipment, or stack luggage or Seat belts (and child restraints where appro- ...
  • Page 196 SAFETY NOTE: Air Bag System Components If A Deployment Occurs Air bag covers may not be obvious in the interior The front air bags are designed to deflate NOTE: trim, but they will open during air bag deployment. immediately after deployment. The Occupant Restraint Controller (ORC) monitors Rollover Events the internal circuits and interconnecting wiring...
  • Page 197 SAFETY As the air bags deflate, you may see some NOTE: Your vehicle may also be designed to perform any  smoke-like particles. The particles are a normal of these other functions in response to the Air bag covers may not be obvious in the interior ...
  • Page 198 SAFETY NOTE: After an accident, if the vehicle will not start after WARNING! performing the reset procedure, the vehicle must After an accident, remember to cycle the ignition to be towed to an authorized dealer to be inspected the STOP (OFF/LOCK) position and remove the key Do not attempt to modify any part of your air ...
  • Page 199: Child Restraints

    SAFETY The EDR in this vehicle is designed to record such To read data recorded by an EDR, special There are different sizes and types of restraints for data as: equipment is required, and access to the vehicle or children from newborn size to the child almost the EDR is needed.
  • Page 200 SAFETY Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Children who are two years old or younger and who Either an Infant Carrier or a Convertible Child Infants and Toddlers have not reached the height or weight limits of their Restraint, facing rearward in a rear seat of the child restraint...
  • Page 201 SAFETY Older Children And Child Restraints WARNING! WARNING! Children who are two years old or who have Never place a rear-facing child restraint in Do not install a rear-facing car seat using a rear  outgrown their rear-facing convertible child seat front of an air bag.
  • Page 202 SAFETY Children Too Large For Booster Seats If the answer to any of these questions was “no,” WARNING! then the child still needs to use a booster seat in Children who are large enough to wear the this vehicle. If the child is using the lap/shoulder Improper installation can lead to failure of an ...
  • Page 203 SAFETY Recommendations For Attaching Child Restraints Use Any Attachment Method Shown With An “X” Below Combined Weight of Restraint Type the Child + Child LATCH – Lower Anchors LATCH – Lower Anchors Seat Belt + Top Tether Seat Belt Only Restraint Only + Top Tether Anchor...
  • Page 204 SAFETY LATCH Positions For Installing Child Restraints In This Vehicle 7 Passenger Quad Seating LATCH Positions 8 Passenger LATCH Positions (Includes Stow ‘n Go) Lower Anchorage Symbol Lower Anchorage Symbol (Two Anchorages Per Seating Position) 7 Passenger Bench Seat LATCH Positions (Two Anchorages Per Seating Position) Top Tether Anchorage Symbol Lower Anchorage Symbol...
  • Page 205 SAFETY Frequently Asked Questions About Installing Child Restraints With LATCH What is the weight limit (child’s weight + Use the LATCH anchorage system until the combined weight of the child and weight of the child restraint) for using the the child restraint is 65 lbs (29.5 kg). Use the seat belt and tether anchor 65 lbs (29.5 kg) LATCH anchorage system to attach the instead of the LATCH system once the combined weight is more than 65 lbs...
  • Page 206 SAFETY Locating The LATCH Anchorages WARNING! The lower anchorages are round bars Always make sure the head restraint is in its that are found at the rear of the seat upright position when the seat is to be used by cushion where it meets the seatback, an occupant who is not in a child restraint.
  • Page 207 SAFETY Locating The Upper Tether Anchorages There are tether strap anchorages located behind all second row seating positions. The third row has a tether anchor on the 40% seat for the right outboard position and in the center of the 60% seat for either the center or left outboard seating position.
  • Page 208 SAFETY Center Seat LATCH 2. Place the child seat between the lower WARNING! anchorages for that seating position. If the This vehicle has 4 lower LATCH anchorages in the second row seat can be reclined, you may Use anchorages C and D to install a ...
  • Page 209 SAFETY How To Stow An Unused Switchable-ALR The seat belts in the passenger seating positions WARNING! are equipped with a Switchable Automatic Locking (ALR) Seat Belt: Retractor (ALR) that is designed to keep the lap Child restraint anchorages are designed to ...
  • Page 210 SAFETY Lap/Shoulder Belt Systems For Installing Child Restraints In This Vehicle 7 Passenger Quad Seat Automatic Locking Retractor 8 Passenger Automatic Locking Retractor (ALR) Locations (ALR) Locations (Includes Stow ‘n Go) ALR — Switchable Automatic Locking Retractor ALR — Switchable Automatic Locking Retractor Top Tether Anchorage Symbol 7 Passenger Bench Seat Automatic Locking Retractor Top Tether Anchorage Symbol...
  • Page 211 SAFETY Frequently Asked Questions The 2nd row head restraints on bench and the center head restraint in the 8 passenger vehicle can be removed if they interfere with the installation of the child restraint. 2nd row Stow 'n Can the rear head restraints be removed? Go head restraints are not removable.
  • Page 212 SAFETY Installing A Child Restraint With A 2. Pull enough of the seat belt webbing from the 8. If the child restraint has a top tether strap and retractor to pass it through the belt path of the the seating position has a top tether Switchable Automatic Locking Retractor child restraint.
  • Page 213 SAFETY Installing Child Restraints Using the Top 1. Look behind the seating position where you plan to install the child restraint to find the Tether Anchorage tether anchorage. You may need to move the seat forward to provide better access to the WARNING! tether anchorage.
  • Page 214 SAFETY 2. Route the tether strap to provide the most WARNING! direct path for the strap between the anchor and the child seat. If your vehicle is equipped An incorrectly anchored tether strap could  with adjustable rear head restraints, raise the lead to increased head motion and possible head restraint, and where possible, route the injury to the child.
  • Page 215: Safety Tips

    SAFETY SAFETY TIPS To connect the tether strap hook to the tether anchorage for either seating position on the 60% third row seat: RANSPORTING ASSENGERS 1. Route the tether strap to provide the most NEVER TRANSPORT PASSENGERS IN THE CARGO direct path for the strap between the anchor AREA.
  • Page 216: Transporting Pets

    SAFETY Air Bag Warning Light Floor Mat Safety Information RANSPORTING The Air Bag Warning Light will turn on for Always use floor mats designed to fit your vehicle. Air Bags deploying in the front seat could harm four to eight seconds as a bulb check Only use a floor mat that does not interfere with the your pet.
  • Page 217: Periodic Safety Checks You Should Make Outside The Vehicle

    SAFETY ERIODIC AFETY HECKS HOULD WARNING! WARNING! UTSIDE EHICLE ALWAYS REMOVE THE EXISTING ALWAYS make sure objects cannot fall or slide   FLOOR MAT FROM THE VEHICLE into the driver’s side floor area when the Tires before installing any other floor mat. vehicle is moving.
  • Page 218: Exhaust Gas

    SAFETY The best protection against carbon monoxide entry XHAUST ARBON ONOXIDE ARNINGS into the vehicle body is a properly maintained engine exhaust system. WARNING! WARNING! Whenever a change is noticed in the sound of the Exhaust gases can injure or kill. They contain Carbon monoxide (CO) in exhaust gases is exhaust system, when exhaust fumes can be carbon monoxide (CO), which is colorless and...
  • Page 219: In Case Of Emergency

    IN CASE OF EMERGENCY HAZARD WARNING FLASHERS When you must leave the vehicle to seek If equipped, the rearview mirror contains an SOS assistance, the Hazard Warning Flashers will and ASSIST button. The Hazard Warning Flashers button is located in continue to operate even though the ignition is WARNING! the lower center area of the instrument panel.
  • Page 220 IN CASE OF EMERGENCY NOTE: ASSIST Call 2. The LED light located between the SOS and ASSIST buttons on the Rearview Mirror will The ASSIST Button is used to automatically Your vehicle may be transmitting data as  turn green once a connection to a SOS authorized by the subscriber.
  • Page 221 IN CASE OF EMERGENCY SOS Call System Limitations WARNING! WARNING! Vehicles sold in Mexico DO NOT have SOS Call Never place anything on or near the vehicle’s The Occupant Restraint Control module turns   system capabilities. operable network and GPS antennas. You on the air bag Warning Light on the instrument SOS or other emergency line operators in Mexico could prevent operable network and GPS...
  • Page 222: Jacking And Tire Changing

    IN CASE OF EMERGENCY JACKING AND TIRE CHANGING — NOTE: LTE (voice/data) or 4G (data) network and/or  Global Positioning Satellite signals are unavail- Your vehicle may be transmitting data as autho-  IF EQUIPPED able or obstructed rized by the subscriber. Equipment malfunction at the SOS operator ...
  • Page 223: Preparations For Jacking

    IN CASE OF EMERGENCY REPARATIONS ACKING 1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas. WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid being hit when operating the jack or changing the wheel.
  • Page 224 IN CASE OF EMERGENCY 3. Remove Jack by turning the jack screw counterclockwise to collapse from storage area that is located behind the tire. Jacking Equipment Jacking Equipment 1 — Inflatable Spare Tire 1 — Inflatable Spare Tire 2 — Tire Service Kit 2 —...
  • Page 225: Jacking Instructions

    IN CASE OF EMERGENCY ACKING NSTRUCTIONS WARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: Always park on a firm, level surface as far from  the edge of the roadway as possible before raising the vehicle.
  • Page 226 IN CASE OF EMERGENCY Jack Locations Front Lifting Point Rear Lifting Point WARNING! Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never get any part of your body under a vehicle that is on a jack.
  • Page 227 IN CASE OF EMERGENCY 3. Place the wrench on the jack screw and turn NOTE: WARNING! clockwise until the jack head is properly Do not install the wheel cover on the inflatable engaged in the described location. Do not To avoid the risk of forcing the vehicle off the spare tire.
  • Page 228: Road Tire Installation

    IN CASE OF EMERGENCY WARNING! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the jack parts and the spare tire in the places provided. Have the deflated (flat) tire repaired or replaced immediately.
  • Page 229: Portable Air Compressor

    IN CASE OF EMERGENCY 4. Install the remaining lug nuts with the cone 7. After 25 miles (40 km) check the lug nut Portable Air Compressor Usage With Inflatable shaped end of the nut toward the wheel. torque with a torque wrench to ensure that all Spare Tire Lightly tighten all the lug nuts until the wheel lug nuts are properly seated against the wheel.
  • Page 230: Return Inflatable Spare Tire

    IN CASE OF EMERGENCY 7. Inflate the tire to 60 psi (4.2 Bar) 3. Install the inflatable spare tire back into its WARNING! recommended as per the label on original stowage location and position facing the wheel or if the vehicle equipped outward.
  • Page 231 IN CASE OF EMERGENCY Tire Service Kit Storage Tire Service Kit And Components And Operation Selecting Air Mode  The Tire Service Kit is secured with a strap and is Push in the Mode Select Knob and stored in the storage bin located behind the rear turn to this position for air pump oper- cargo trim panel.
  • Page 232 IN CASE OF EMERGENCY The Sealant Bottle is a one tire application use Do not lift or carry the Tire Service Kit by the   WARNING! and needs to be replaced after each use. Always hoses. replace these components immediately at your A loose Tire Service Kit thrown forward in a ...
  • Page 233 IN CASE OF EMERGENCY Sealing A Tire With Tire Service Kit 3. Remove the cap from the valve stem and then If the sealant (white fluid) does not flow within 0 – screw the fitting at the end of the Sealant Hose 10 seconds through the Sealant Hose: Whenever You Stop To Use Tire Service Kit: onto the valve stem.
  • Page 234 IN CASE OF EMERGENCY 2. The pump will start to inject air into 3. Immediately disconnect the Sealant Hose After Driving: the tire immediately after the from the valve stem, reinstall the cap on the Pull over to a safe location and turn on the ...
  • Page 235 IN CASE OF EMERGENCY 4. Uncoil the Power Plug and insert 2. Disconnect the Tire Service Kit from the valve the plug into the vehicle's 12 Volt stem, reinstall the cap on the valve stem and power outlet. unplug from 12 Volt outlet. 5.
  • Page 236: Jump Starting

    IN CASE OF EMERGENCY NOTE: 4. Rotate the bottle up beyond vertical to release. CAUTION! For sealant bottle installation, follow these  Do not use a portable battery booster pack or steps reverse order. any other booster source with a system voltage Replacement sealant bottles are available at ...
  • Page 237: Jump Starting Procedure

    IN CASE OF EMERGENCY Only jump directly off positive post which has a Connecting The Jumper Cables WARNING! positive (+) symbol on or around the post. 1. Connect the positive (+) end of the jumper Batteries contain sulfuric acid that can burn See below steps to prepare for jump starting: ...
  • Page 238: Refueling In Emergency - If Equipped

    IN CASE OF EMERGENCY REFUELING IN EMERGENCY – IF EQUIPPED Disconnecting The Jumper Cables CAUTION! 1. Disconnect the negative (-) end of the jumper The vehicle is equipped with a refueling funnel for To avoid fuel spillage and overfilling, do not “top cable from the remote negative post of the a Cap-Less Fuel System page 221.
  • Page 239: If Your Engine Overheats

    IN CASE OF EMERGENCY IF YOUR ENGINE OVERHEATS 3. Ensure funnel is inserted fully to hold flapper WARNING! doors open. If the vehicle is overheating, it will need to be You or others can be badly burned by hot engine 4.
  • Page 240: Manual Park Release

    IN CASE OF EMERGENCY MANUAL PARK RELEASE NOTE: Follow These Steps To Activate The Manual Park Release: When the lever is locked in the released position, the tether will remain outside of the trim panel and WARNING! 1. Apply firm pressure to the brake pedal while the access cover cannot be reinstalled.
  • Page 241: Freeing A Stuck Vehicle

    IN CASE OF EMERGENCY FREEING A STUCK VEHICLE NOTE: CAUTION! Push the ESC OFF button to place the Electronic If your vehicle becomes stuck in mud, sand or Stability Control (ESC) system in “Partial Off” Racing the engine or spinning the wheels may ...
  • Page 242: Towing A Disabled Vehicle

    IN CASE OF EMERGENCY TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial towing service. Towing Condition Wheel OFF The Ground ALL MODELS Flat Tow NONE NOT ALLOWED Front Wheel Lift Or Dolly Tow Rear NOT ALLOWED Flatbed...
  • Page 243 IN CASE OF EMERGENCY FCA US LLC recommends towing your vehicle with Vehicle Recovery Tow Points CAUTION! all four wheels OFF the ground using a flatbed. Your vehicle is equipped with Vehicle Recovery Recovery feature: If flatbed equipment is not available, this vehicle Points that can be used to recover a disabled must be towed with the front wheels OFF the vehicle, located on the underbody of the vehicle.
  • Page 244: Enhanced Accident Response System

    IN CASE OF EMERGENCY ENHANCED ACCIDENT RESPONSE SYSTEM NOTE: CAUTION! The Safehold feature will engage the Electric Park (EARS) Brake whenever the driver's door is opened (if the Recovery load should: ignition is ON, transmission is not in PARK, and Be applied at constant speed.
  • Page 245: Servicing And Maintenance

    SERVICING AND MAINTENANCE SCHEDULED SERVICING An authorized dealer will reset the oil change Once A Month Or Before A Long Trip: indicator message after completing the scheduled Check engine oil level.  Your vehicle is equipped with an automatic oil oil change.
  • Page 246: Maintenance Plan

    SERVICING AND MAINTENANCE AINTENANCE Refer to the Maintenance Plan for required maintenance. At Every Oil Change Interval As Indicated By Oil Change Indicator System: Change oil and filter.  Rotate the tires at the first sign of irregular wear, even if it occurs before the oil indicator system turns on. ...
  • Page 247 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV/Universal joints. Inspect front suspension, boot seals, tie rod ends, and replace if necessary. Inspect the brake linings, parking brake function. Inspect front accessory drive tensioner, idler pulley, and replace if necessary.
  • Page 248 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Maintenance Replace engine air cleaner filter. Replace cabin air filter. To be replaced every 12,000 mi (19,000 km). Replace spark plugs. Replace the front accessory drive belt. Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first.
  • Page 249: Engine Compartment

    SERVICING AND MAINTENANCE ENGINE COMPARTMENT 3.6L E NGINE 1 — Engine Coolant Pressure Cap 5 — Windshield Washer Reservoir Cap 2 — Brake Fluid Reservoir Cap 6 — Engine Oil Fill 3 — Engine Air Cleaner Filter 7 — Engine Oil Dipstick 4 —...
  • Page 250: Checking Oil Level

    SERVICING AND MAINTENANCE HECKING EVEL AINTENANCE ATTERY CAUTION! To ensure proper engine lubrication, the engine oil Your vehicle is equipped with a maintenance-free Overfilling or underfilling the crankcase will must be maintained at the correct level. Check the battery. You will never have to add water, and cause aeration or loss of oil pressure.
  • Page 251: Pressure Washing

    SERVICING AND MAINTENANCE VEHICLE MAINTENANCE NGINE CAUTION! Engine Oil Selection An authorized dealer has the qualified service It is essential when replacing the cables on  personnel, special tools, and equipment to the battery that the positive cable is attached Use only the manufacturer's recommended fluid perform all service operations in an expert to the positive post and the negative cable is...
  • Page 252: Engine Oil Filter

    SERVICING AND MAINTENANCE Synthetic Engine Oils Engine Air Cleaner Filter Selection NGINE ILTER The quality of replacement filters varies Your engine was designed for synthetic engine oils, The engine oil filter should be replaced with a new considerably. Only high quality Mopar® certified only use synthetic API approved engine oils.
  • Page 253: Air Conditioner Maintenance

    SERVICING AND MAINTENANCE When inspecting accessory drive belts, small “Groove jumping" (belt does not maintain  WARNING! cracks that run across the ribbed surface of a belt correct position on pulley) from rib to rib, are considered normal. These are Use only refrigerants and compressor lubri- ...
  • Page 254 SERVICING AND MAINTENANCE Refrigerant Recovery And Recycling — 1. Remove all contents from the glove 4. Open the glove compartment door as far as compartment. possible to gain access to the cabin air filter R–1234yf compartment cover. R–1234yf Air Conditioning Refrigerant is a Hydrofluoroolefin (HFO) that is endorsed by the Environmental Protection Agency and is an ozone-friendly substance with a low...
  • Page 255: Body Lubrication

    SERVICING AND MAINTENANCE 6. After removing the snaps, lift up the should be wiped clean to remove dust and grit; CAUTION! compartment cover to gain access to the fresh after lubricating, excess oil and grease should be air inlet. removed. Particular attention should also be given The cabin air filter is identified with an arrow to to hood latching components to ensure proper indicate airflow direction through the filter.
  • Page 256 SERVICING AND MAINTENANCE NOTE: 1. Lift the wiper arm to raise the wiper blade off 2. To disengage the wiper blade from the wiper of the glass, until the wiper arm is in the full arm, flip up the release tab on the wiper blade Life expectancy of wiper blades varies depending up position.
  • Page 257 SERVICING AND MAINTENANCE 3. With the wiper blade disengaged, remove the Installing The Front Wipers Rear Wiper Blade Removal/Installation wiper blade from the wiper arm by holding the 1. Lift the wiper arm off of the glass, until the 1. Lift the rear wiper arm pivot cap away from wiper arm with one hand and separating the wiper arm is in the full up position.
  • Page 258: Exhaust System

    SERVICING AND MAINTENANCE 2. Lift the rear wiper arm fully off the glass. 4. Still holding the bottom end of the wiper blade, Installing The Rear Wiper move the wiper blade upward and away from 1. Lift the rear wiper arm pivot cap away from the wiper arm to disengage.
  • Page 259 SERVICING AND MAINTENANCE If you notice a change in the sound of the exhaust NOTE: CAUTION! system; or if the exhaust fumes can be detected Intentional tampering with emissions control inside the vehicle; or when the underside or rear of The catalytic converter requires the use of systems can result in civil penalties being ...
  • Page 260: Cooling System

    SERVICING AND MAINTENANCE Engine Coolant Checks If the engine coolant (antifreeze) is dirty or OOLING YSTEM contains visible sediment, have an authorized Check the engine coolant (antifreeze) protection dealer clean and flush with Organic Additive WARNING! every 12 months (before the onset of freezing Technology (OAT) coolant (conforming to weather, where applicable).
  • Page 261 SERVICING AND MAINTENANCE Do not use water alone or alcohol-based engine Please review these recommendations for using Some vehicles require special tools to add   coolant products. Do not use additional rust OAT engine coolant that meets the requirements of coolant properly.
  • Page 262 SERVICING AND MAINTENANCE Coolant Level Do not overfill the coolant expansion bottle.  WARNING! Check the coolant freeze point in the radiator The coolant expansion bottle provides a quick  Do not open hot engine cooling system. Never  and in the coolant expansion bottle. If engine visual method for determining that the coolant add engine coolant (antifreeze) when the coolant needs to be added, the contents of the...
  • Page 263: Brake System

    SERVICING AND MAINTENANCE Be sure to clean the top of the master cylinder area RAKE YSTEM WARNING! before removing the cap. If necessary, add fluid to In order to ensure brake system performance, all bring the fluid level up to the requirements To avoid contamination from foreign matter or ...
  • Page 264: Automatic Transmission

    SERVICING AND MAINTENANCE Fluid Level Check Fluid And Filter Changes UTOMATIC RANSMISSION The fluid level is preset at the factory and does not Under normal operating conditions, the fluid Special Additives require adjustment under normal operating installed at the factory will provide satisfactory The manufacturer strongly recommends against conditions.
  • Page 265: Fuses

    SERVICING AND MAINTENANCE The fuses protect electrical systems against Underhood Fuses USES excessive current. The Power Distribution Center (PDC) is located in General Information When a device does not work, you must check the the engine compartment near the battery. This fuse element inside the blade fuse for a break/ center contains cartridge fuses, mini-fuses, WARNING!
  • Page 266 SERVICING AND MAINTENANCE Power Distribution Center...
  • Page 267 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description * If Equipped – – Not Used – 25 Amp Clear Ignition Coil/Fuel Injector – – Not Used – 25 Amp Clear Amplifier/Active Noise Control * – – Not Used – –...
  • Page 268 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description * If Equipped Handsfree LT & RT RR Door Release F25A – 10 Amp Red Mod * F25B – 10 Amp Red Active Grill Shutter/ PWR Mirror * 40 Amp Green –...
  • Page 269 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description * If Equipped – – Not Used 40 Amp Green – Folding Seat Module * – 20 Amp Yellow Fuel Pump Motor 30 Amp Pink – CBC Feed #1 (Interior Lights) 30 Amp Pink –...
  • Page 270 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description * If Equipped F56B – 10 Amp Red ESP/ESC – – Not Used Drive Train Control Mod / Power – 10 Amp Red Transfer Unit * 30 Amp Pink – Trailer Tow Receptacle * –...
  • Page 271 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description * If Equipped 20 Amp Blue – Trailer Tow Backup * – 5 Amp Tan Overhead Console / RR ISC – 20 Amp Yellow Uconnect/DCSD/Telematics RR Entertainment Screen 1 & 2/ Media HUB 1 &...
  • Page 272 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description * If Equipped – 20 Amp Yellow Cigar Lighter – – Not Used – – Not Used – 20 Amp Yellow Front Heated Seats * – 20 Amp Yellow Rear Heated Seats * –...
  • Page 273 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description * If Equipped Occupant Restraint Controller (ORC) – 10 Amp Red (Airbag) Occupant Restraint Controller (ORC) – 10 Amp Red (Airbag) – 15 Amp Blue Left HID Headlamp * 30 Amp Pink –...
  • Page 274: Bulb Replacement

    SERVICING AND MAINTENANCE EPLACEMENT Replacement Bulbs, Names, And Part Numbers In the instance a bulb needs to be replaced, this section includes bulb description and replacement part numbers. Some of the inside bulbs are brass or glass-wedge base. Aluminum base bulbs are not approved. NOTE: See an authorized dealer for LED bulb replacement.
  • Page 275 SERVICING AND MAINTENANCE Exterior Bulbs Lamps Bulb Number Reflector Low Beam — H11LL Halogen Head Lamp Reflector High Beam — 9005LL Front Turn Signal Lamp PWY24WNA Front Side Marker Lamp Front Park Lamp PWY24WNA Center High Mounted Stop Lamp (CHMSL) LED (Serviced at an authorized dealer) Stop/Turn Signal Lamp W21/5WLL...
  • Page 276 SERVICING AND MAINTENANCE Replacing Exterior Bulbs FRONT AND REAR SIDE MARKER LAMPS See below steps to replace: FRONT TURN SIGNAL LAMP 1. Remove the three fasteners from the inner See below steps to replace: wheel liner and carefully peel back liner for 1.
  • Page 277: Tires

    SERVICING AND MAINTENANCE TIRES LT (Light Truck) — Metric tire sizing is based on 1 — US DOT Safety Standards Code  US design standards. The size designation for (TIN) LT-Metric tires is the same as for P-Metric tires AFETY NFORMATION 2 —...
  • Page 278 SERVICING AND MAINTENANCE TIRE SIZING CHART EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on US design standards, or "..blank.." = Passenger car tire based on European design standards, or LT = Light truck tire based on US design standards, or T or S = Temporary spare tire or 31 = Overall diameter in inches (in)
  • Page 279 SERVICING AND MAINTENANCE EXAMPLE: Load Identification: Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL) tire: XL = Extra load (or reinforced) tire, or  LL = Light load tire or ...
  • Page 280 SERVICING AND MAINTENANCE EXAMPLE: 01 = Number representing the year in which the tire was manufactured (two digits) 01 means the year 2001  Prior to July 2000, tire manufacturers were only required to have one number to represent the year in which the tire was manufactured. Example: 031 could ...
  • Page 281 SERVICING AND MAINTENANCE Tire Loading And Tire Pressure This placard tells you important information about the: NOTE: 1. Number of people that can be carried in the The proper cold tire inflation pressure is listed on vehicle. the driver’s side B-pillar or the rear edge of the driver's side door.
  • Page 282 SERVICING AND MAINTENANCE (4) The resulting figure equals the To determine the maximum loading conditions of Metric Example For Load Limit your vehicle, locate the statement “The combined available amount of cargo and luggage For example, if “XXX” amount equals 635 kg and weight of occupants and cargo should never load capacity.
  • Page 283 SERVICING AND MAINTENANCE...
  • Page 284: Tires - General Information

    SERVICING AND MAINTENANCE NOTE: Safety WARNING! Unequal tire pressures from side to side may  WARNING! Overloading of your tires is dangerous. cause erratic and unpredictable steering Overloading can cause tire failure, affect vehicle response. Improperly inflated tires are dangerous and ...
  • Page 285 SERVICING AND MAINTENANCE Tire Inflation Pressures Check tire pressures more often if subject to a WARNING! wide range of outdoor temperatures, as tire The proper cold tire inflation pressure is listed on pressures vary with temperature changes. High speed driving with your vehicle under the driver's side B-pillar or rear edge of the driver's maximum load is dangerous.
  • Page 286 SERVICING AND MAINTENANCE Consult an authorized tire dealer for tire repairs It is not recommended driving a vehicle loaded at and additional information. full capacity or to tow a trailer while a tire is in the run flat mode page 171. Ú...
  • Page 287 SERVICING AND MAINTENANCE Life Of Tire Keep dismounted tires in a cool, dry place with as WARNING! little exposure to light as possible. Protect tires The service life of a tire is dependent upon varying from contact with oil, grease, and gasoline. Do not use a tire, wheel size, load rating, or ...
  • Page 288: Tire Types

    SERVICING AND MAINTENANCE Summer tires do not contain the all season Snow tires generally have lower speed ratings than CAUTION! designation or mountain/snowflake symbol on the what was originally equipped with your vehicle and tire sidewall. Use Summer tires only in sets of four; should not be operated at sustained speeds over Replacing original tires with tires of a different failure to do so may adversely affect the safety and...
  • Page 289 SERVICING AND MAINTENANCE Spare Tire Matching Original Equipped Tire Do not install a wheel cover or attempt to mount a Since this tire has limited tread life, the original conventional tire on the compact spare wheel, equipment tire should be repaired (or replaced) And Wheel —...
  • Page 290: Wheel And Wheel Trim Care

    SERVICING AND MAINTENANCE Full Size Spare — If Equipped Your wheels are susceptible to deterioration WARNING! caused by salt, sodium chloride, magnesium The full size spare is for temporary emergency use chloride, calcium chloride, etc., and other road Limited use spares are for emergency use only. only.
  • Page 291: Snow Traction Devices

    SERVICING AND MAINTENANCE When cleaning extremely dirty wheels including NOTE: RACTION EVICES excessive brake dust, care must be taken in the If you intend parking or storing your vehicle for an Use of traction devices require sufficient selection of tire and wheel cleaning chemicals and extended period after cleaning the wheels with tire-to-body clearance.
  • Page 292: Tire Rotation Recommendations

    SERVICING AND MAINTENANCE The reasons for any rapid or unusual wear should WARNING! CAUTION! be corrected prior to rotation being performed page 243. Using tires of different size and type (M+S, Ú Do not drive for a prolonged period on dry ...
  • Page 293: Department Of Transportation

    SERVICING AND MAINTENANCE DEPARTMENT OF TRANSPORTATION variations in driving habits, service Sustained high temperature can cause practices, and differences in road the material of the tire to degenerate UNIFORM TIRE QUALITY GRADES characteristics and climate. and reduce tire life, and excessive temperature can lead to sudden tire The following tire grading categories RACTION...
  • Page 294: Storing The Vehicle

    SERVICING AND MAINTENANCE STORING THE VEHICLE The following maintenance recommendations will Do not use abrasive cleaning components, enable you to obtain maximum benefit from the solvents, steel wool or other aggressive material to If you are storing your vehicle for more than three corrosion resistance built into your vehicle.
  • Page 295: Interiors

    SERVICING AND MAINTENANCE INTERIORS Special Care WARNING! If you drive on salted or dusty roads or if you  A frayed or torn seat belt could rip apart in a EATS ABRIC ARTS drive near the ocean, hose off the undercarriage collision and leave you with no protection.
  • Page 296: Plastic And Coated Parts

    SERVICING AND MAINTENANCE LASTIC OATED ARTS EATHER URFACES CAUTION! Use Mopar® Total Clean to clean vinyl upholstery. Mopar® Total Clean is specifically recommended Do not use Alcohol and Alcohol-based and/or for leather upholstery. Ketone based cleaning products to clean leather CAUTION! Your leather upholstery can be best preserved by seats, as damage to the seat may result.
  • Page 297: Technical Specifications

    TECHNICAL SPECIFICATIONS VEHICLE IDENTIFICATION NUMBER (VIN) BRAKE SYSTEM WHEEL AND TIRE TORQUE SPECIFICATIONS The VIN is on the left front corner of the instrument Your vehicle is equipped with dual hydraulic brake Proper lug nut/bolt torque is very important to panel and is visible from outside of the vehicle systems.
  • Page 298: Fuel Requirements

    TECHNICAL SPECIFICATIONS 3.6L E After 25 miles (40 km) check the lug nut/bolt NGINE torque to be sure that all the lug nuts/bolts are Do not use E-85 flex fuel or ethanol blends greater properly tightened. than 15% in this engine. WARNING! This engine is designed to meet all emissions regulations and provide...
  • Page 299: Gasoline/Oxygenate Blends

    TECHNICAL SPECIFICATIONS E-85 I CNG A LP F ASOLINE XYGENATE LENDS YSTEM EHICLES ODIFICATIONS Some fuel suppliers blend unleaded gasoline with oxygenates such as ethanol. Non-Flex Fuel Vehicles (FFV) are compatible with Modifications that allow the engine to run on gasoline containing up to 15% ethanol (E-15).
  • Page 300: Materials Added To Fuel

    TECHNICAL SPECIFICATIONS ATERIALS DDED YSTEM AUTIONS CAUTION! Besides using unleaded gasoline with the proper The use of fuel additives, which are now being  CAUTION! octane rating, gasolines that contain detergents, sold as octane enhancers, is not recom- corrosion and stability additives are Follow these guidelines to maintain your mended.
  • Page 301: Fluid Capacities

    TECHNICAL SPECIFICATIONS FLUID CAPACITIES Metric Fuel (Approximate) 3.6L Engine 19 Gallons 71 Liters Engine Oil With Filter 3.6L Engine 5 Quarts 4.7 Liters Cooling System* 13.1 Quarts — Standard Duty Cooling 12.4 Liters — Standard Duty Cooling 3.6L Engine 13.4 Quarts — Heavy Duty Cooling 12.7 Liters —...
  • Page 302: Chassis Fluids And Lubricants

    TECHNICAL SPECIFICATIONS Component Fluid, Lubricant, or Genuine Part We recommend you use a Mopar® Engine Oil Filter. If a Mopar® Engine Oil Engine Oil Filter Filter is unavailable only use filters that meet or exceed SAE/USCAR-36 Filter Performance Requirements. Fuel Selection – 3.6L Engine 87 Octane (R+M)/2 Method, 0-15% ethanol (Do not use E-85).
  • Page 303: Customer Assistance

    CUSTOMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE IF YOU NEED ASSISTANCE Any communication to FCA US LLC’s customer center should include the following information: FOR YOUR VEHICLE FCA US LLC and its authorized dealers are vitally Owner's name and address  interested in your satisfaction.
  • Page 304: Mexico

    CUSTOMER ASSISTANCE Canadian residents with hearing difficulties that FCA US LLC is not responsible for any service EXICO require assistance can use the special needs relay contract you may have purchased from another Av. Prolongacion Paseo de la Reforma, 1240 service offered by Bell Canada.
  • Page 305: Warranty Information

    CUSTOMER ASSISTANCE WARRANTY INFORMATION REPORTING SAFETY DEFECTS To contact NHTSA, you may call the Vehicle Safety Hotline toll free at See the Warranty Information for the terms and 50 U NITED TATES 1-888-327-4236 (TTY: provisions of FCA US LLC warranties applicable to , D.C.
  • Page 306: Publication Order Forms

    CUSTOMER ASSISTANCE PUBLICATION ORDER FORMS To access your Owner's Information online, visit Le présent appareil est conforme aux CNR www.mopar.com/om d`Innovation, Science and Economic Development (US) or To order the following manuals, you may use either applicables aux appareils radio exempts de www.owners.mopar.ca (Canada).
  • Page 307 INDEX ......251 ........262 Air Conditioner Maintenance Adding Fluid ..........295 ....251 .......262 About Your Brakes Air Conditioner Refrigerant Fluid And Filter Change ....259 ........251 ..........262 Adding Engine Coolant (Antifreeze) Air Conditioner System Fluid Change ..........298 ......66 ........262 Additives, Fuel Air Conditioning Filter...
  • Page 308 ........261 ........220 ..........258 Fluid Check Changing A Flat Tire Cooling System ...........261 ..........276 ......259 Master Cylinder Chart, Tire Sizing Adding Coolant (Antifreeze) ............109 ..........260 Parking Check Engine Light Coolant Level ..........95 ......103 .........299 Warning Light (Malfunction Indicator Light) Cooling Capacity ......113...
  • Page 309 Disposal Checking Oil Level ........248 Flashers Antifreeze (Engine Coolant) ......260 Compartment ..........247 Hazard Warning ..........217 Door Ajar ............ 96 Compartment Identification ....... 247 Turn Signals ...... 54 Door Ajar Light ........... 96 Coolant (Antifreeze) ........299 Flash-To-Pass ..........54 Driver’s Seat Back Tilt ........
  • Page 310 ..........299 ........108 Tank Capacity Heater, Engine Block ..............263 ..........162 ............. 12 Fuses Hill Start Assist Key Fob ..........19 Hitches Arm The System ..........131 ......... 19 Trailer Towing Disarm The Alarm ...... 50 .......50 ....14 Garage Door Opener (HomeLink) HomeLink (Garage Door Opener) Programming Additional Key Fobs .........127...
  • Page 311 Bulb Replacement ......272 Load Shed Intelligent Battery Sensor ....93 Modifications/Alterations Cruise ............101 Loading Vehicle ........77 Vehicle ............8 Daytime Running .......... 54 Tires ............279 Monitor, Tire Pressure System ......171 Dimmer Switch, Headlight ......54 Low Tire Pressure System .......
  • Page 312 ............299 ........18 Viscosity Pretensioners Uconnect Settings ......102 ........... 182 ........17 Onboard Diagnostic System Seat Belts Remote Starting System ........102 .........272 Operating Precautions Replacement Bulbs ..........285 Operator Manual Replacement Tires ..........304 ..........283 ........303 Owner's Manual Radial Ply Tires Reporting Safety Defects ......
  • Page 313 Lap/Shoulder Belt Operation ......178 Shifting Sway Control, Trailer ........164 Lap/Shoulder Belt Untwisting .....178 Automatic Transmission ......113 Symbol Glossary ..........8 Lap/Shoulder Belts ........176 Shoulder Belts ..........176 Synthetic Engine Oil ........250 Operating Instructions ........178 Side View Mirror Adjustment ......48 System, Remote Starting ........
  • Page 314 ...........291 ..........132 ........249 Quality Grading Trailer Weight Vehicle Maintenance ............283 ....... 8 Radial Transaxle Vehicle Modifications/Alterations ..........285 ........... 111 ..........47 Replacement Automatic Voice Command ............290 ........... 111 ......47 Rotation Operation Voice Recognition System (VR) ..........275 ..........113 Safety Transmission ............276...
  • Page 315 It is always the driver’s responsibility to comply with all local laws. This Owner’s Manual has been prepared to help you get acquainted with your new Chrysler brand vehicle and to provide a convenient reference source for common questions.
  • Page 316 ©2021 FCA US LLC. All Rights Reserved. Tous droits réservés. Chrysler is a registered trademark of FCA US LLC or FCA Canada Inc., used under license. Chrysler est une marque First Edition déposée de FCA US LLC ou FCA Canada Inc., utilisée sous le permis. App Store is a registered trademark of Apple Inc. Google Play Store is a registered trademark of Google.

Table of Contents

Save PDF