Chrysler Conquest 1988 Service Manual page 215

LIGHTING SYSTEM
- Column Switch
8-203
COLUMN SWITCH
NOBIPAE
REMOVAL AND INSTALLATION
Removal steps Removal steps
4* 4*
1. Steering wheel 1. Steering wheel
2. Lower column cover 2. Lower column cover
3. Cable bands 3. Cable bands
4. Column switch 4. Column switch
NOTE
(I) Reverse the removal procedures to reinstall.
(2) **: Refer to "Service Points of Removal".
I
13Y3500
SERVICE POINT OF REMOVAL
1. REMOVAL OF STEERING WHEEL
Remove the steering wheel by using the special tool.
I
I
13Y880
INSPECTION
(1) Remove the knee protector.
(2) Disconnect the column switch connector.
(3) Operate the switch and check the continuity between the
terminals.
NOTE
O-O indicates that there is continuity between the terminals.