Chrysler Conquest 1988 Service Manual page 207

LIGHTING SYSTEM
- Headlight
8-195
16Y3561
I
(2) Irregularity between the headlight housing assembly
and the fender, and between the assembly and the
header panel, can be eliminated by using the stopper
bolt in the headlight housing assembly to make the
necessary adjustment.
(3) Couple the linkage.
INSPECTION
POP-UP MOTOR
(1) Disconnect the wiring connector from the pop-up motor,
and connect an ohmmeter to the motor side connector.
(2) Run the motor by the manual knob and check the continuity
between the terminals.
NOTE
(1)
(2)
O-O indicates that there is continuity between the terminals.
0 (plus), and 0 (minus) indicate ohmmeter test-bar connection.
POP-UP RELAY
(1) Remove the pop-up relay from the relay box in the engine
compartment.