Bc412 Length Control; Bc412 Set Length 1 - Datalogic Touch 90 pro Product Reference Manual

Enter/Exit Programming Mode

BC412 Length Control

This feature specifies either variable length decoding or fixed length decoding for the BC412
symbology.
Variable Length:
Fixed Length:
DEFAULT
$CBCLC01
BC412 Length Control = Fixed Length

BC412 Set Length 1

This feature specifies one of the bar code lengths for
minimum label length if in
Mode. Length includes the bar code's data characters only.
The length can be set from 0 to 50 characters. See
programming instructions.
Select BC412 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and not
save the entry string. You can then start again at the begin-
ning.
240
For variable length decoding, a minimum and maximum length may be set.
For fixed length decoding, two different lengths may be set.

Variable Length
$CBCL1
DEFAULT
BC412 Length Control = Variable Length
BC412 Length
Mode, or the first fixed length if in
"Set Length 1"
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from the
Alphanumeric characters in
senting your desired character(s). End by scanning the ENTER/
EXIT bar code again.
01 = Length 1 is 1 Character
$CBCLC00 
Control. Length 1 is the
Fixed Length
on page 278 for more detailed
Appendix D, Keypad
repre-
~
CANCEL
Touch TD1100
BC412