Enter/Exit Programming Mode
EAN 8 Guard Insertion
Enables/disables the ability to insert a guard into an otherwise full-strike EAN 8 segment.
DEFAULT
$C8BGI01
EAN 8 Guard Insertion = Enable
EAN 8 Guard Substitution
Enables/disables the ability of the reader to substitute guard pattern for even parity 6 when an
EAN/JAN8 label is presented.
DEFAULT
$C8BGS01
EAN 8 Guard Substitution = Enable
100
$C8BGI00
EAN 8 Guard Insertion = Disable
$C8BGS00
EAN 8 Guard Substitution = Disable
EAN 8
Touch TD1100