Code 128 Set Length 1 - Datalogic Touch 90 pro Product Reference Manual

Enter/Exit Programming Mode

Code 128 Set Length 1

This feature specifies one of the bar code lengths for
minimum label length if in
Mode. Length includes the bar code's data characters only.
The length can be set from 1 to 80 characters. See
programming instructions.
Select Code 128 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and not
save the entry string. You can then start again at the begin-
ning.
152
Variable Length
$CC8L1
DEFAULT
Code 128 Length
Mode, or the first fixed length if in
"Set Length 1"
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from the
Alphanumeric characters in
senting your desired character(s). End by scanning the ENTER/
EXIT bar code again.
01 = Length 1 is 1 Character
Code 128
Control. Length 1 is the
Fixed Length
on page 278 for more detailed
Appendix D, Keypad
repre-
~
CANCEL
Touch TD1100