Codabar
Codabar Set Length 2
This feature specifies one of the bar code lengths for
maximum label length if in
Mode. The length includes the bar code's start, stop, check and data characters. The length
must include at least one data character.
The length can be set from 3 to 50 characters. A setting of 00 specifies to ignore this length
(only one fixed length). See
instructions.
Select Codabar Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and not
save the entry string. You can then start again at the begin-
ning.
Product Reference Guide
Variable Length
"Set Length 2"
$CCBL2
DEFAULT
Codabar Length
Mode, or the second fixed length if in
on page 280 for more detailed programming
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from the
Alphanumeric characters in
senting your desired character(s). End by scanning the ENTER/
EXIT bar code again.
50 = Length 2 is 50 Characters
Enter/Exit Programming Mode
Control. Length 2 is the
Fixed Length
Appendix D, Keypad
repre-
~
CANCEL
183