Enter/Exit Programming Mode
I 2 of 5 Set Length 1
This feature specifies one of the bar code lengths for
minimum label length if in
Mode. The length includes the bar code's check and data characters.
The length can be set from 2 to 50 characters in increments of two. See
page 278 for more detailed programming instructions.
Select I 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and not
save the entry string. You can then start again at the begin-
ning.
162
Variable Length
$CI2L1
DEFAULT
I 2 of 5 Length
Mode, or the first fixed length if in
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from the
Alphanumeric characters in
senting your desired character(s). End by scanning the ENTER/
EXIT bar code again.
06 = Length 1 is 6 Characters
Interleaved 2 of 5 (I 2 of 5)
Control. Length 1 is the
Fixed Length
"Set Length 1"
on
Appendix D, Keypad
repre-
~
CANCEL
Touch TD1100