Usb-Oem Device Usage; Usb-Oem Interface Options - Datalogic Touch 90 pro Product Reference Manual

Enter/Exit Programming Mode

USB-OEM Device Usage

The USB-OEM protocol allows for the reader to be identified as one of two different types of
bar code readers. Depending on what other scanners you may already have connected to a USB-
OEM POS, you may need to change this setting to enable all devices to communicate.
Options are:
$CIBUT01
USB-OEM Device Usage = Handheld Scanner

USB-OEM Interface Options

This setting provides for an interface specific control mechanism.
Options are:
$CIFO102
USB-OEM Interface Options = Ignore
48
• Table Top Scanner
• Handheld Scanner
It may be necessary to switch device usage when connecting two
readers/scanners of the same type to a POS system.
NOTE

• Obey — Obey Reader Configuration Host Commands
• Ignore — Ignore Reader Configuration Host Commands

USB-OEM Device Usage
$CIBUT00
USB-OEM Device Usage = Table Top Scanner
DEFAULT
$CIFO101
USB-OEM Interface Options = Obey
DEFAULT


Touch TD1100