Enter/Exit Programming Mode
Code 93 Set Length 1
This feature specifies one of the bar code lengths for
minimum label length if in
Mode. Length includes the bar code's data characters only.
The length can be set from 01 to 50 characters. See
detailed programming instructions.
Select Code 93 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and not
save the entry string. You can then start again at the begin-
ning.
222
Variable Length
$CC9L1
DEFAULT
Code 93 Length
Mode, or the first fixed length if in
"Set Length 1"
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from the
Alphanumeric characters in
senting your desired character(s). End by scanning the ENTER/
EXIT bar code again.
01 = Length 1 is 1 Character
Code 93
Control. Length 1 is the
Fixed Length
on page 278 for more
Appendix D, Keypad
repre-
~
CANCEL
Touch TD1100