Enter/Exit Programming Mode
Datalogic 2 of 5 Set Length 2
This feature specifies one of the bar code lengths for
is the maximum label length if in
Length
The length can be set from 2 to 50 characters. A setting of 00 specifies to ignore this length
(only one fixed length). See
instructions.
Select Datalogic 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and not
save the entry string. You can then start again at the begin-
ning.
170
Mode. The length includes the bar code's data characters only.
"Set Length 2"
$CD2L2
DEFAULT
Datalogic 2 of 5 Length
Variable Length
Mode, or the second fixed length if in
on page 280 for more detailed programming
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from the
Alphanumeric characters in
senting your desired character(s). End by scanning the ENTER/
EXIT bar code again.
50 = Length 2 is 50 Characters
Datalogic 2 of 5
Control. Length 2
Appendix D, Keypad
repre-
~
CANCEL
Touch TD1100
Fixed