Ricoh MP 401 spf User Manual page 202

10. Troubleshooting
Message
"Exceeded time limit for
LDAP server search. Check
the server status."
"LDAP server authentication
has failed. Check the
settings."
"Memory device error
occurred. Check the memory
device."
"Memory is full. Cannot
scan. The scanned data will
be deleted."
"Memory is full. Do you
want to store scanned file?"
200
Causes
A network error has
occurred and connection
has failed.
The user name and
password differ from those
set for LDAP Authentication.
A non-writable medium is
being used.
Because of insufficient hard
disk space, the first page
could not be scanned.
Because there is not enough
free hard disk space in the
machine for storing in the
Document Server, only some
of the pages could be
scanned.
Solutions
• Try the operation again. If the
message is still shown, the
network may be busy.
• Check that the correct settings for
LDAP server are listed in
[Administrator Tools] of [System
Settings]. For details about LDAP
server, see "Programming the
LDAP server", Connecting the
Machine/ System Settings
For details about LDAP Authentication,
see Security Guide .
Use a different medium.
• Wait for a while, and then retry
the scan operation.
• Reduce the scan area or scanning
resolution. For details about
changing scan area and scanning
resolution, see "Various Scan
Settings", Scan .
• Delete unneeded stored files. For
details about how to delete stored
files, see "Deleting Stored File",
Scan .
Specify whether to use the data or not.
.