Ricoh MP 401 spf User Manual page 162

10. Troubleshooting
Problem
"You do not have the
privileges to use this
function." continues to be
displayed even though you
have entered a valid user
name.
An error message remains,
even if misfed paper is
removed.
An error message remains,
even if consumables are
replaced and/or misfed
paper is removed.
An error message remains
displayed even after the
indicated cover is closed.
Original images are printed
on the reverse side of the
paper.
160
Causes
The logged in user name
does not have permission for
the selected function.
• When a misfeed
message appears, it
remains until you open
and close the cover as
required.
• Paper is still jammed in
the tray.
This may occur if the HDD is
not installed.
One or more covers of the
machine other than the
indicated one are still open.
You may have loaded the
paper incorrectly.
Solutions
For details about how to set
permissions, see Security Guide
After removing misfed paper, fully
open the front cover, and then close it.
For details about removing jammed
paper, see "Removing Jammed Paper",
Troubleshooting .
Press the [Start] key.
Close all the covers of the machine.
• Load paper into the paper trays
with the print side down.
• Load paper into the bypass tray
with the print side up.
.