Ricoh MP 401 spf User Manual page 177

Message
"Exceeded time limit for
LDAP server search. Check
the server status."
"Functional problem
occurred. Stopped
processing."
"Functional problems with
facsimile. Data will be
initialized."
"LDAP server authentication
has failed. Check the
settings."
"Orig. scanned for diffrnt
fnctn."
Causes
A network error has
occurred and connection
has failed.
The main power switch was
turned off while the machine
was receiving a document
by Internet Fax.
There is a problem with the
fax.
A network error has
occurred and connection
has failed.
A function of the machine
other than the Facsimile
function is being used such
as the Document Server
function.
When Messages Are Displayed on the Control Panel
Solutions
• Try the operation again. If the
message is still shown, the
network may be busy.
• Check that the correct settings for
LDAP server are listed in
[Administrator Tools] of [System
Settings]. For details about LDAP
server, see "Programming the
LDAP server", Connecting the
Machine/ System Settings
Even if you turn the main power switch
back on immediately, depending on
the mail server, the machine might not
be able to resume reception of the
Internet Fax if the timeout period has
not expired. Wait until the mail server's
timeout period has expired, and then
resume reception of the Internet Fax.
For details about reception of the
Internet Fax, contact your
administrator.
Record the code number shown on the
screen, and then contact your service
representative. Other functions can be
used.
Make settings correctly for the user
name and the password for LDAP
server authentication.
Before sending a file by fax, cancel the
job in progress. For example, press
[Exit], and then press the [Home] key.
Press the [Document Server] icon on
the [Home] screen. Next, press the
[Stop] key. When the message
appears on the screen, follow the
instructions to cancel the job.
.
175