Ricoh MP 401 spf User Manual page 192

10. Troubleshooting
Message
"Exceeded max. number of
files. (Auto)"
"Exceeded max. number of
pages of Document Server.
Cannot store."
"Exceeded max. number of
pages to print for
temporary/stored jobs."
"Exceeded max. pages.
Collate is incomplete."
"Exceeded max. number of
pages. (Auto)"
"Exceeded the maximum unit
count for Print Volume Use.
The job has been
cancelled."
"Failed to obtain file system." PDF direct printing could not
"File system is full."
190
Causes
While using the error job
store function to store
Normal Print jobs as Hold
Print files, the maximum file
capacity for file storage or
Hold Print file management
(automatic) was exceeded.
The maximum page
capacity of the Document
Server was exceeded.
While printing a Sample
Print, Locked Print, Hold
Print, or Stored Print file, the
maximum page capacity
was exceeded.
The number of pages
exceeds the maximum
number of sheets that you
can use Collate with.
While using the error job
store function to store
Normal Print jobs as Hold
Print files, the maximum
page capacity was
exceeded.
The number of pages the
user is permitted to print has
been exceeded.
be performed because the
file system could not be
obtained.
PDF file does not print out
because the capacity of the
file system is full.
Solutions
Delete Hold Print files (automatic) or
unneeded files stored in the machine.
Delete some of the files stored in the
Document Server or reduce the number
of pages that you want to send.
• Delete unneeded files stored in the
machine.
• Reduce the number of pages to
print.
Reduce the number of pages to print.
• Delete unneeded files stored in the
machine.
• Reduce the number of pages to
print.
For details about Print Volum. Use
Limit., see Security Guide
Turn off the main power switch, and
then back on again. If the message
appears again, contact your service
representative.
Delete all unnecessary files from the
hard disk, or decrease the file size sent
to the machine.
.