Messages Displayed When Using The Facsimile Function - Ricoh MP 401 spf User Manual

Message
"Press [Continue] to scan
and copy remaining
originals."
• If you set [Memory Full Auto Scan Restart] in [Input/Output] of User Tools to [On], even if the
memory becomes full, the memory overflow message will not be displayed. The machine will make
copies of the scanned originals first, and then automatically proceed to scan and to copy the
remaining originals. In this case, the resulting sorted pages will not be sequential. For details about
Memory Full Auto Scan Restart, see "Input/Output", Copy/ Document Server

Messages Displayed When Using the Facsimile Function

This section describes the machine's main messages. If other messages appear, follow their instructions.
• Settings that can be confirmed in System Settings or Facsimile Features on the control panel can
also be confirmed from Web Image Monitor. For details about how to confirm the settings from
Web Image Monitor, see Web Image Monitor Help.
Message
"Connection with the
destination has failed. Check
the settings. Entered path
name might be incorrect, or
firewall and security settings
might be blocking network
connectivity."
"Check whether there are
any network problems."
[13-10]
Causes
The machine checked if the
remaining originals should
be copied, after the scanned
originals were printed.
Causes
The name of the computer or
folder entered as the
destination is wrong.
The alias telephone number
you entered is already
registered on the gatekeeper
by another device.
When Messages Are Displayed on the Control Panel
Solutions
• Remove all copies, and then press
[Continue] to continue copying.
• Press [Stop] to stop copying.
.
Solutions
Check that the computer name and the
folder name for the destination are
correct.
• Check that the correct alias phone
number is listed in [H.323
Settings] of [Facsimile Features].
For details about H.323 Settings,
see "Initial Settings", Fax
• For details about network
problems, contact your
administrator.
.
167