Ricoh MP 401 spf User Manual page 160

10. Troubleshooting
Problem
"Please wait." appears.
"Please wait." appears.
"Please wait." appears.
158
Causes
This message appears when
you press the [Energy Saver]
key.
This message appears when
the machine is warming up.
The current environmental
condition is outside the
recommended temperature
range for the machine.
Solutions
Wait for a while. If the machine is not
ready in five minutes, turn off the main
power switch and make sure the main
power indicator turns off. Wait at least
ten seconds and then turn the main
power switch on again. If the machine
is still not ready in five minutes, contact
your service representative.
• Wait until the message
disappears. Do not turn off the
main power switch while the
message is displayed.
• If the machine is not ready in five
minutes, turn off the main power
switch and make sure the main
power indicator turns off. Wait at
least ten seconds and then turn
the main power switch on again.
If the machine is still not ready in
five minutes, contact your service
representative.
• Check the optimum environmental
conditions for the machine and
move it to a different location.
• Leave the machine for a while
and allow it to adapt to the
environment.
For details about the optimum
environmental conditions for the
machine, see "Optimum Environmental
Conditions After Moving the Machine",
Maintenance and Specifications .