Ricoh MP 401 spf User Manual page 171

Message
"Check whether there are
any network problems."
[13-25]
"Check whether there are
any network problems."
[13-26]
Causes
In [Effective Protocol], the IP
address is not enabled, or
an incorrect IP address has
been registered.
The "Effective Protocol" and
"SIP Server IP Address"
settings are different, or an
incorrect IP address has
been registered.
When Messages Are Displayed on the Control Panel
Solutions
• Check that "IPv4" in [Effective
Protocol] is set to "Active" in
[System Settings]. For details
about Effective Protocol, see
"Interface Settings", Connecting
the Machine/ System Settings
• Check that the correct IPv4
address is specified for the
machine in [System Settings]. For
details about IPv4 address, see
"Interface Settings", Connecting
the Machine/ System Settings
• For details about network
problems, contact your
administrator.
• Check that the correct IP address
is specified for the machine in
[System Settings]. For details
about IP address, see "Interface
Settings", Connecting the
Machine/ System Settings
• For details about network
problems, contact your
administrator.
.
.
.
169