Ricoh MP 401 spf User Manual page 161

Problem
"Please wait." appears.
"Memory is full. Do you
want to store scanned file?"
appears.
The user code entry screen is
displayed.
The Authentication screen
appears.
"Authentication has failed."
appears.
"Authentication has failed."
appears.
Causes
This message appears when
you change the toner
cartridge.
The scanned originals
exceed the number of
sheets/pages that can be
stored on the hard disk.
Users are restricted by User
Code Authentication.
Basic Authentication,
Windows Authentication,
LDAP Authentication or
Integration Server
Authentication is set.
The entered Login User
Name or Login Password is
not correct.
The machine cannot perform
authentication.
When You Have Problems Operating the Machine
Solutions
• Wait until the message
disappears. Do not turn off the
main power switch while the
message is displayed.
• If the machine is not ready in five
minutes, turn off the main power
switch and make sure the main
power indicator turns off. Wait at
least ten seconds and then turn
the main power switch on again.
If the machine is still not ready in
five minutes, contact your service
representative.
• Press [Yes] to store pages that
have been scanned. Delete
unnecessary files by pressing
[Delete File].
• Press [No] if you are not storing
pages that have been scanned.
Delete unnecessary files by
pressing [Delete File].
For details about how to log in when
User Code Authentication is enabled,
see "When the Authentication Screen is
Displayed", Getting Started
Enter your Login User Name and Login
Password. For details about the
Authentication screen, see "When the
Authentication Screen is Displayed",
Getting Started .
For details about the correct Login User
Name and Login Password, see
Security Guide .
For details about authentication, see
Security Guide .
.
159