Ricoh MP 401 spf User Manual page 178

10. Troubleshooting
Message
"Put original back, check it
and press the Start key."
"Some invalid destination(s)
contained. Do you want to
select only valid
destination(s)?"
"Some page(s) are almost
blank. To cancel press the
Stop key."
"The selected file(s)
contained file(s) without
access privileges. Only
file(s) with access privileges
will be deleted."
"Updating the destination
list... Please wait. Specified
destination(s) or sender's
name has been cleared."
"You do not have the
privileges to use this
function."
"The destination cannot be
selected because its
encryption certificate is not
currently valid."
176
Causes
Original jammed during
Memory Transmission.
The specified group contains
fax destinations, e-mail
destinations, and/or folder
destinations, either of which
are incompatible with the
specified transmission
method.
The first page of the
document is almost blank.
You tried to delete a
document for which you do
not have permission to
delete.
The destination list is being
updated from the network
using Web Image Monitor.
The logged in user name
does not have permission for
the selected function.
The user certificate
(destination certificate) has
expired.
Solutions
Press [Exit], and then send the
documents again.
In the message that appears at each
transmission, press [Select].
The original's blank side might have
been scanned. Be sure to place your
originals correctly. For details about
determining the cause of blank pages,
see "Detecting Blank Pages", Fax
To check your access permission for
stored documents, or to delete a
document you do not have permission
to delete, see Security Guide
Wait until the message disappears. Do
not turn off the main power switch
while this message is displayed.
Depending on the number of
destinations to be updated, there may
be some delay before you can resume
operation. Operation is not possible
while this message is displayed.
For details about how to set
permissions, see Security Guide
A new user certificate must be installed.
For details about the user certificate
(destination certificate), see Security
Guide .
.
.
.