Ricoh MP 401 spf User Manual page 186

10. Troubleshooting
Message
"Tray setg. do not match spcfd
siz&typ. Select new tray or use
siz&typ below."
"n ppr siz msmtch Select new
tray or use ppr size below."
(A tray name is placed at n.)
"Printer font error."
"Problems with the wireless
board. Please call service."
(A "wireless LAN board" or
"Bluetooth interface unit" is
referred to as a "wireless
board".)
"The selected file(s) contained
file(s) without access privileges.
Only file(s) with access
privileges will be deleted."
184
Causes
The printer driver settings are
incorrect or the tray does not
contain paper of the size or
type selected in the printer
driver.
The size of the paper in the
tray does not match the paper
size specified in the printer
driver.
An error has occurred in the
font settings.
• The machine has
detected a Bluetooth
failure although it could
detect a Bluetooth
interface unit.
• The machine has
detected a wireless LAN
board failure.
You have tried to delete files
without the authority to do so.
Solutions
• Check that the printer driver
settings are correct, and
then load paper of the size
selected in the printer driver
into the tray. For details
about how to change the
paper size, see "Changing
the Paper Size", Paper
Specifications and Adding
Paper .
• Select the tray manually to
continue printing, or cancel
a print job. For details about
how to select the tray
manually, or cancel a print
job, see "If an Error Occurs
with the Specified Paper
Size and Type", Print
Select a tray containing paper
that is the same size as the
specified paper size.
Contact your service
representative.
Check that the Bluetooth interface
unit or wireless LAN board is
installed properly, or contact
your service representative.
To check your access permission
for stored documents, or to delete
a document you do not have
permission to delete, see Security
Guide .
.