Table of Contents
Advertisement
3.5
VOLTAGE MEASUREMENT (V)
To measure voltage, proceed as follows:
1.
Set the switch to
2.
Connect the black lead to the COM terminal and the red lead to the "+"
terminal.
3.
Connect the test probes or the alligator clips to the circuit to be
measured. The device selects AC or DC automatically according to
which measured value is larger. The AC or DC symbol displays blinking
in auto detect mode.
To select AC, DC or AC+DC manually, press the
between them. The symbol corresponding to the choice will then display.
The measured value is displayed:
In DC
In AC and AC+DC
.
Display
st
1
row
Voltage V RMS
nd
2
row
DC RIPPLE in %
rd
3
row
DC voltage component, V
Quantity
25
(yellow) button to toggle
DC
Advertisement
Table of Contents
