Table of Contents
Advertisement
This button activates the detection of the MAX, MIN, PEAK+, PEAK- or AVG values
of the measurements made.
Max and Min are the extreme mean values in DC and the extreme RMS values in
AC. Peak+ is the maximum instantaneous peak and Peak- is the minimum
instantaneous peak.
In this mode, the Auto Power Off function of the device is automatically
disabled. The
short
long (> 2 sec)
symbol is displayed on the screen.
Activates detection of the
MAX/MIN/AVG and PEAK values and
displays MAX/AVG and MIN values
Displays the PEAK+,
AVG, and PEAK- values (on a second
screen)
Displays MAX/AVG and MIN
values without exiting from the mode (the
values already detected are not erased)
Depending on the mode, AC or
DC, the crest factor (CF), harmonics,
frequency, and RIPPLE are also available
- Activates the detection of
MAX/MIN/AVG values
- Displays the MAX, MIN and AVG value
successively
- Returns to the display of the present
measurement without exiting from the
mode (the values already detected are
not erased)
- Exits the MAX/MIN/PEAK mode. The
values previously recorded are then
erased
If the HOLD function is enabled, it
is
not
possible
MAX/MIN/PEAK
function must first be disabled first.
18
to
exit
from
mode.
The
HOLD
the
Advertisement
Table of Contents
