Table of Contents
Advertisement
3.6
CONTINUITY TEST
Warning: Before performing the test, make sure that the circuit is off and all
capacitors have been discharged.
1.
Set the switch to
2.
Connect the black lead to the COM terminal and the red lead to the "+"
terminal.
3.
Connect the test probes or the alligator clips to the circuit or component
to be measured.
An audible signal is emitted if there is continuity and the measured value is
displayed on the screen.
Display
1st row
Total RMS voltage V RMS or TRMS
2nd row
Crest factor (CF)
3rd row
DC voltage component, V
; the
Quantity
symbol is displayed.
26
DC
Advertisement
Table of Contents
