Button - AEMC 407 User Manual

The buttons respond differently to short, long, and sustained presses.
In this section, the
button's functionality.
This button is used to:

Store and look up the last values acquired specific to each function (V, A,

, W) according to the specific modes previously activated
(MAX/MIN/PEAK, Hz, THD). The present display is then maintained while
the detection and acquisition of new values continues.

Perform automatic zero correction in
long
(> 2 sec)
See § 2.5.3 and § 2.6.3 for the
and buttons.
icon represents the possible positions of the switch for the
value of each new measurement is displayed)
Performs automatic zero correction (see 3.9.2)
This mode operates if the MAX/MIN/PEAK or
HOLD modes (short press) are first de activated
button functionality in combination with the
A / and W
DC AC+DC
Holds the last value displayed
Returns to normal display mode (the
15
/
(see § 3.9.2).
DC AC+DC