Opening The Dataview Control Panel; Using The Control Panel - AEMC 407 User Manual

11. When the drivers are finished installing, the Installation Successful
dialog box will appear. Click OK.
12. Next, the Installation Wizard Complete window will appear. Click Finish.
13. A Question dialog box appears next. Click Yes to read the procedure for
connecting the instrument to the USB port on the computer.
NOTE: The Setup window remains open. You may now select another option to
download (e.g. Adobe
14. Restart your computer, then pair the instrument to the computer as
described in section 3.15.
Shortcuts for DataView
installation process have been added to your desktop.
3.22

OPENING THE DATAVIEW CONTROL PANEL

To open the Power Meter Control Panel:
• Double-click the icon that was created during installation, located on the
desktop.
• The Connection window appears.
NOTE: If only one power meter is connected to the computer, it will be selected
and a connection will be established automatically.
The Connection window lists the connected instrument in the Instrument drop-
down list.
If multiple units are attached, select the desired unit.
Once the desired instrument has been selected, click OK and the Control Panel
will attempt to connect to the instrument and download any data.
NOTE: The default layout can be changed by moving and resizing each window.
3.23

USING THE CONTROL PANEL

The Control Panel is used to view the instrument status, download, view and
erase the memory. It is also used to generate reports in DataView
the recorded data into an excel format.
To open the Control Panel, either click on the Control Panel option from
DataView's Instrument menu or select the control panel icon placed on the
desktop during the installation.
®
Reader), or close the window.
®
and each instrument control panel selected during the
407
54
®
and export