Table of Contents
Advertisement
1.
Launch the Dataview
desktop during software installation. Refer to section 3.22 for DataView
software installation. The instrument should automatically connect if
only one power meter is paired. If more than one instrument is paired,
select the instrument you wish to connect to from the drop-down list in
the connection window.
2.
Selecting OK will establish the connection between the power meter
and the DataView
status and downloaded data. If data is present in the instrument's
memory, the software will automatically start downloading once
connected.
3.15.2.2 Pairing using Windows XP
1.
In the active measurement function, press the
simultaneously. The
the display.
2.
Connect the supplied Bluetooth USB Adapter into an available USB
port. Windows will install any necessary drivers automatically.
3.
From the "Start" menu select Settings > Control Panel > Bluetooth
devices.
®
Control Panel using the icon placed on the
®
software. It is now possible to view the instrument
symbol will appear in the upper right corner of
46
and
buttons
®
Advertisement
Table of Contents
