Statement of Compliance Chauvin Arnoux , Inc. d.b.a. AEMC Instruments ® ® certifies that this instrument has been calibrated using standards and instruments traceable to international standards. We guarantee that at the time of shipping your instrument has met its published specifications.
Page 5
Thank you for purchasing the AEMC Multimeter. For best results from your instrument and for your safety, read the enclosed operating instructions carefully and comply with the precautions for use. These products must be only used by qualified and trained users.
Page 6
■ Strictly comply with the fuse specifications. Disconnect all cables before opening the fuse access cover. ■ Do not modify the instrument or replace components using substitute parts. Repairs and adjustments must be performed by AEMC Instruments. ® ■ Replace the battery immediately if the symbol appears on the display.
Save the damaged packing container to substantiate your claim. 1.2 Ordering Information Multimeter Model 5212 ..............Cat. #2154.07 Multimeter Model 5215 ..............Cat. #2154.08 Multimeter Model 5217 ..............Cat. #2154.09 Includes meter, soft carrying pouch, set of 2 color-coded leads (red/black), K-Thermocouple adapter (Model 5217), two 1.5V AA batteries and a user manual.
1.3 Introducing the Models 5212, 5215 & 5217 The Digital Multimeter Models 5212, 5215, and 5217 measure electrical and physical quantities, including: ■ AC and DC Voltage ■ AC and DC Current ■ Resistance and Continuity ■ Capacitance ■ Frequency and duty cycle (Model 5217) ■...
Page 11
Model 5212 Model 5215 Model 5217 Auto Range ● ● ● Max-Min ● ● Frequency (Hz) and ● Duty Cycle Relative Measurement ● ● Sleep Mode ● ● ● Multimeter Models 5212/5215/5217 GlobalTestSupply www. .com uality Products Online at: sales@GlobalTestSupp...
Max, Min, or Max minus Min indicator Diode test selected Fahrenheit or Celsius indicator AC or DC indicator Decimal prefix Display Hold enabled (nano, micro, or milli) Amps or volts indicator; Capacitance (Farads) indicator Multimeter Models 5212/5215/5217 GlobalTestSupply www. .com uality Products Online at: sales@GlobalTestSupp...
■ 10A is used for measuring AC and DC current up to 10A, and (Model 5217) current frequency/duty cycle. For the Model 5212 this terminal is used for all current measurements. For the Models 5215 and 5217 this is used for (amp) measurements.
7. Turn ON the instrument by selecting any dial setting and check that it powers up correctly. Then check the LCD to see whether or not the Low Battery indicator is displayed. If so, replace the batteries. Figure 3-1 Multimeter Models 5212/5215/5217 GlobalTestSupply www. .com...
■ Magnet Mount: The removable protective housing includes a set of molded- in magnets located near the top. These allow the instrument to be affixed onto a magnetic surface. Multimeter Models 5212/5215/5217 GlobalTestSupply www. .com uality Products Online at:...
■ Maximum/Minimum mode displays the maximum and minimum measurements and the difference between them (Models 5215 and 5217). ■ Relative Measurement defines a measurement value against which subsequent measurements will be compared (Models 5215 and 5217). Multimeter Models 5212/5215/5217 GlobalTestSupply www. .com uality Products Online at:...
(The MAX-MIN symbol appears.) 4. To exit this mode, press and hold down the Max-Min button for longer than 2 seconds. NOTE: Auto Range is disabled in Max-Min mode. Multimeter Models 5212/5215/5217 GlobalTestSupply www. .com uality Products Online at:...
In addition, the Model 5217 provides the following measurements: ■ Frequency and duty cycle ■ Temperature WARNING Be sure to carefully observe all safety precautions when testing components, especially when working with unknown currents or voltages. Multimeter Models 5212/5215/5217 GlobalTestSupply www. .com uality Products Online at: sales@GlobalTestSupp...
The closer the conductor, the more dashes are displayed and the faster the blinking/beeping. Hz/% µ Figure 3-1 Multimeter Models 5212/5215/5217 GlobalTestSupply www. .com uality Products Online at: sales@GlobalTestSupp...
AC and DC measurements. (Note that V is not available in mode.) NOTE: When the Model 5212 or Model 5215 is set to , input above 400mV (Model 5212) or 600mV (Model 5215) displays the symbol on the LCD, indicating an overload condition.
4. Press the yellow button to toggle back and forth between AC and DC measurements. NOTE: If current is above 10A, an alarm sounds and the instrument’s fuse may blow. Multimeter Models 5212/5215/5217 GlobalTestSupply www. .com uality Products Online at:...
NOTE: If there is no continuity (the resistance is above 600Ω), the LCD displays , indicating an open circuit or high resistance. symbol on the LCD, indicating an overload condition. Multimeter Models 5212/5215/5217 GlobalTestSupply www. .com uality Products Online at:...
5. Touch the probes to the desired points in the circuit under test. The resistance measurement appears on the LCD. If the resistance between the two points is above 60MΩ (or 40MΩ in the Model 5212), the LCD displays the symbol.
3V) the symbol appears on the LCD. This can help identify the anode and cathode of the diode. < 50 Hz/% µ Figure 3-5 Multimeter Models 5212/5215/5217 GlobalTestSupply www. .com uality Products Online at: sales@GlobalTestSupp...
5. Touch the probes to the capacitor leads. After a few moments, the measurement will stabilize and display on the LCD. (This may require 15 seconds or more for measurements in the 100mF range.) Hz/% µ Figure 3-6 Multimeter Models 5212/5215/5217 GlobalTestSupply www. .com uality Products Online at: sales@GlobalTestSupp...
■ Allow one minute for thermal stabilization. ■ Press the yellow button to toggle between Celsius (°C) and Fahrenheit (°F). ■ If the measured temperature exceeds 1300°C (2372°F) the LCD displays the symbol. Multimeter Models 5212/5215/5217 GlobalTestSupply www. .com uality Products Online at: sales@GlobalTestSupp...
600V CAT III IEC61010-1, IEC61010-2-033 Display Digital LCD: • Models 5215 and 5217: 6000 count updates 3 times/s • Model 5212: 4000 count updates 3 times/s Temperature Operating: -4°F to 120°F (-20° to 50°C) Storage: -22°F to 130°F (-30° to 55°C) Temperature coefficient 150ppm (for T °C function 0.15%/°C)
4. Touch the tips of the two leads together. The buzzer beeps, and a reading appears on the LCD. A reading between 0 and 000.2Ω indicates the fuse is good. If appears on the LCD, replace the fuse (see § 4.3.3). Multimeter Models 5212/5215/5217 GlobalTestSupply www. .com uality Products Online at:...
4. Locate the fuses (Figure 15). Carefully remove the fuse to be replaced, using a flathead screwdriver or similar implement if necessary. 5. Insert the replacement fuse. 6. Replace the battery cover, screws, and protective cover. Figure 4-1 Multimeter Models 5212/5215/5217 GlobalTestSupply www. .com uality Products Online at:...
Service Center at one-year intervals for recalibration, or as required by other standards or internal procedures. Note for Calibration Laboratories and Facilities: The Models 5212, 5215, and 5217 include onboard firmware enabling each instrument to be calibrated by connecting the inputs to a calibrator and pressing the front panel push buttons.
4.6 Limited Warranty The Models 5212, 5215 & 5217 are warranted to the owner for a period of three years from the date of original purchase against defects in manufacture. This limited warranty is given by AEMC Instruments, not by the distributor from ®...