The buttons respond differently to short, long, and sustained presses.
In this section, the
button's functionality.
BUTTON
2.1
This button is used to:
Store and look up the last values acquired specific to each function (V, A,
, T°) according to the specific modes previously activated (MAX/MIN, Hz).
The present display is then maintained while the detection and acquisition
of new values continues.
Perform automatic lead resistance compensation (see § 3.6.1).
Successive
presses on
long
(> 2 sec)
See § 2.4.2 and § 2.5.2 for the
and
buttons.
2 THE BUTTONS
icon represents the possible positions of the switch for the
First press: Holds the display of the last value
displayed
Second press: Returns to normal display mode
(the value of each new measurement is
displayed)
Performs automatic lead resistance
compensation (see 3.6.1)
button functionality in combination with the
Function
13