Installation - Datalogic Magellan 8300 Product Reference Manual

Installation

NOTE
a
Product Reference Guide
1. Make sure that all cables are firmly attached (except that the AC/
DC power supply should not be connected to the AC outlet yet).
Figure 2-6
Reference
2. Remove the platter to gain access to the interior lift handle. Grasp
the platter in the positions shown in
from the scanner. If the top edge of the platter is blocked, you may
find it easier to grasp the platter vertical bezel as shown in
26b.
Figure 2-26
illustrates an L-shaped weigh platter, which fea-
tures a vertical bezel. Your platter may not contain a vertical
bezel.
Figure 2-26. Removing the Platter
Figure 2-25.
and
Figure 2-26
b
Set-Up & Installation
and gently lift it
Figure 2-
(Obstruction)
Coin
2-35