Beep After Weigh - Datalogic Magellan 8300 Product Reference Manual

In-counter scanner/scales

Hide thumbs Also See for Magellan 8300:

Table of Contents

RS-232 Beep After Weigh

Product Reference Guide

Enables/disables the ability of the scanner to beep after weight data is

transmitted to the host. Scale interfaces that support this item are: RS-232

ICL, RS-232 SASI, and RS-232 Single Cable.

To enable/disable the Beep After Weigh feature:

1. Scan the SWITCH bar code.

2. Scan either the enable or disable bar code below. You'll need to cover

any unused bar codes on this and the facing page to ensure that the

scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

BEEP AFTER WEIGH = DISABLE

BEEP AFTER WEIGH = ENABLE

RS-232 Features

Show Quick Links

Table of Contents

Magellan 8400