DataBar Expanded Length Control
NOTE
6-262
This feature specifies either variable-length or fixed-length decoding for
DataBar Expanded.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You'll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
You must now set the features
DataBar Expanded Length
DataBar Expanded LENGTH CONTROL = VARIABLE-LENGTH
DataBar Expanded LENGTH CONTROL = FIXED-LENGTH
DataBar Expanded Length 1
2.
Magellan
and
TM
8300/8400