DataBar Omnidirectional Enable
NOTE
6-254
Enables/disables the ability of the scanner to decode DataBar Omnidirec-
tional labels.
This value-added feature is a factory-programmed option. Con-
tact your dealer for information about upgrading your system
to include this advanced capability.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
DataBar Omnidirectional = DISABLE
DataBar Omnidirectional = ENABLE
TM
Magellan
8300/8400