Code 128 Enable - Datalogic Magellan 8300 Product Reference Manual

In-counter scanner/scales

Hide thumbs Also See for Magellan 8300:

Table of Contents

Code 128 Enable

Product Reference Guide

Enables/disables

the ability of the scanner to decode Code 128 labels.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan either the enable or disable bar code below. You'll need to cover

any unused bar codes on this and the facing page to ensure that the

scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

1. Exception: The Code 128 symbology is always enabled with regard to scanning/

reading the special C128 programming bar codes provided in this manual.

CODE 128 = DISABLE

CODE 128 = ENABLE

Code 128 Enable

Show Quick Links

Table of Contents

Magellan 8400